43,510 bikes · 495 makes Add a bikeLog inRegister
Scooters

2008Benelli Pepe 50

Rate this bike
Click to vote

36 fields on record

The 2008 Benelli Pepe 50 is an entry-level scooter designed for new riders and urban commuters seeking affordable, economical transportation. Its lightweight 82kg frame and automatic transmission make it easy to handle in city traffic, while the reliable air-cooled single-cylinder engine delivers modest but adequate performance for short journeys and learner riders.

Capacity
49.2 ccm
Engine
Single, two-stroke
Gearbox
Not on record
Know it? Add it →
Dry weight
82.0 kg
Seat height
720 mm
Power
3.6 HP (2.6 kW) @ 6250 RPM

What’s new for the 2008 Benelli Pepe 50

vs the 2007
Spec20072008
Power 5.4 HP (4.0 kW) 3.6 HP (2.6 kW) @ 6250 RPM
Torque — 4.2 Nm (0.4 kgf-m or 3.1 ft.lbs)
Dry weight 81.0 kg (178.6 pounds) 82.0 kg (180.8 pounds)
Other years 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

How it rides

Editorial estimate from the spec sheet - not lab tested
Speed 0Agility 62Comfort 40Off-road 5Touring 10Road manners 35
Off-road & trail5%
Cornering30%
City riding85%
Daily riding55%
Touring8%
Two-up15%
Track2%
Best for
It's built for short urban hops like commuting to work, running errands, or nipping to the shops rather than any kind of performance riding.
Built for
It has a friendly, retro-styled personality that prioritizes practicality, fuel economy, and effortless everyday usability over excitement.
Not ideal for
It is not suitable for anyone wanting highway speeds, long-distance touring, a passenger companion, or any off-road capability.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us
At 720mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2008 Benelli Pepe 50, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine
Capacity
49.2 ccm
Power
3.6 HP (2.6 kW) @ 6250 RPM
Torque
4.2 Nm (0.4 kgf-m)
Engine type
Single, two-stroke
Power/weight ratio
0.0439 HP/kg (dry)
Bore x stroke
40.0 x 39.2 mm
Compression
7.5:1
Cooling system
Air
Fuel system
Carburettor
Starting
Electric & kick
Ignition
Electronic, with capacitive discharge
Valves per cylinder
4
Lubrication system
Separate, with automatic mixing
Transmission
Transmission type
Automatic
Final drive
Belt
Clutch
Wet, cable operated
Dimensions & weight
Wheelbase
1260 mm
Overall length
1850 mm
Overall width
710 mm
Overall height
1020 mm
Seat height
720 mm
Dry weight
82.0 kg
Wet weight
98.0 kg
Fuel capacity
7.50 litres
Chassis & suspension
Frame
Double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment
Front suspension
Telescopic fork
Rear suspension
Engine acting as an oscillating swing-arm
Front wheel travel
85 mm
Rear wheel travel
55 mm
Brakes & wheels
Front brakes
Single disc
Front brakes diameter
220 mm
Rear brakes
Expanding brake (drum brake)
Rear brakes diameter
110 mm
Front tyre
2.50-16
Rear tyre
2.75-16

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted
Specification 200720082009201220142016
Capacity 49 cc 49 cc 49 cc 49 cc 49 cc 49 cc
Dry weight 81 kg 82 kg 82 kg 81 kg 81 kg 93 kg
Seat height 720 mm 720 mm 720 mm 770 mm 770 mm 770 mm
Fuel capacity 7.5 L 7.5 L 7.5 L 7.5 L 7.5 L 6 L

Illustrative - generated automatically by diffing the year records already on file, not a manufacturer-published changelog.

Rider Reviews

—
☆☆☆☆☆
Be the first to rate

Common questions

What is the engine size of the Benelli Pepe 50?

The 2008 Benelli Pepe 50 has a Capacity of 49.2 ccm (3.00 cubic inches).

What engine power does the Benelli Pepe 50 have?

The 2008 Benelli Pepe 50 has a Power of 3.6 HP (2.6 kW) @ 6250 RPM.

What is the torque of the Benelli Pepe 50?

The 2008 Benelli Pepe 50 has a Torque of 4.2 Nm (0.4 kgf-m or 3.1 ft.lbs).

How much does the Benelli Pepe 50 weigh?

The 2008 Benelli Pepe 50 has a Dry weight of 82.0 kg (180.8 pounds).

Shop this bike

Affiliate links

We may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.

Similar bikes

Same category, weighted similarity

More Benelli Motorcycles