43,669 bikes · 493 makes Add a bikeLog inRegister
Scooters

2009Benelli Pepe 50

★ 1.0
Click to vote

35 fields on record

The 2009 Benelli Pepe 50 is a lightweight, budget-friendly scooter designed for urban commuters and first-time riders seeking simplicity and ease of use. Its automatic transmission, low seat height of 720mm, and modest power delivery make it accessible to riders of all experience levels. Best known for its practical design, fuel efficiency, and reliable air-cooled engine, the Pepe 50 excels as an economical city runabout.

Capacity
49.2 ccm
Engine
Single, two-stroke
Gearbox
Not on record
Know it? Add it →
Dry weight
82.0 kg
Seat height
720 mm
Power
3.6 HP (2.6 kW) @ 6250 RPM
⇄ Compare with another bike + Add to garage All model years

What’s new for the 2009 Benelli Pepe 50

vs the 2008
Spec20082009
Torque 4.2 Nm (0.4 kgf-m or 3.1 ft.lbs) 4.2 Nm (0.4 kgf-m or 3.1 ft.lbs) @ 6000 RPM
Front suspension Telescopic fork Hydraulic telescopic fork
Rear suspension Engine acting as an oscillating swing-arm Floating engine with hydraulic rear dumper
Other years 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

How it rides

Editorial estimate from the spec sheet - not lab tested
Speed 1Agility 63Comfort 40Off-road 5Touring 10Road manners 35
Off-road & trail5%
Cornering30%
City riding85%
Daily riding55%
Touring8%
Two-up15%
Track2%
Best for
It's built for short urban hops like commuting to work, running errands, or nipping to the shops rather than any kind of performance riding.
Built for
It has a friendly, retro-styled personality that prioritizes practicality, fuel economy, and effortless everyday usability over excitement.
Not ideal for
It is not suitable for anyone wanting highway speeds, long-distance touring, a passenger companion, or any off-road capability.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us
At 720mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2009 Benelli Pepe 50, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine
Capacity
49.2 ccm
Power
3.6 HP (2.6 kW) @ 6250 RPM
Torque
4.2 Nm (0.4 kgf-m) @ 6000 RPM
Engine type
Single, two-stroke
Power/weight ratio
0.0439 HP/kg (dry)
Bore x stroke
40.0 x 39.2 mm
Compression
7.5:1
Cooling system
Air
Fuel system
Carburettor
Starting
Electric & kick
Ignition
Electronic, with capacitive discharge
Lubrication system
Separate, with automatic mixing
Transmission
Transmission type
Automatic
Final drive
Belt
Clutch
Wet, cable operated
Dimensions & weight
Wheelbase
1260 mm
Overall length
1850 mm
Overall width
710 mm
Overall height
1020 mm
Seat height
720 mm
Dry weight
82.0 kg
Wet weight
98.0 kg
Fuel capacity
7.50 litres
Chassis & suspension
Frame
Double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment
Front suspension
Hydraulic telescopic fork
Rear suspension
Floating engine with hydraulic rear dumper
Front wheel travel
85 mm
Rear wheel travel
55 mm
Brakes & wheels
Front brakes
Single disc
Front brakes diameter
220 mm
Rear brakes
Expanding brake (drum brake)
Rear brakes diameter
110 mm
Front tyre
2.50-16
Rear tyre
2.75-16

Specs last verified against published sources: .

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted
Specification 20072009201220142016
Capacity 49 cc 49 cc 49 cc 49 cc 49 cc
Dry weight 81 kg 82 kg 81 kg 81 kg 93 kg
Seat height 720 mm 720 mm 770 mm 770 mm 770 mm
Fuel capacity 7.5 L 7.5 L 7.5 L 7.5 L 6 L

Illustrative - generated automatically by diffing the year records already on file, not a manufacturer-published changelog.

Rider Reviews

1.0
★☆☆☆☆
Rider rating

Own one? Add it to My Garage and write an owner review with an Owner badge.

Common questions

What is the engine size of the Benelli Pepe 50?

The 2009 Benelli Pepe 50 has a Capacity of 49.2 ccm (3.00 cubic inches).

What engine power does the Benelli Pepe 50 have?

The 2009 Benelli Pepe 50 has a Power of 3.6 HP (2.6 kW) @ 6250 RPM.

What is the torque of the Benelli Pepe 50?

The 2009 Benelli Pepe 50 has a Torque of 4.2 Nm (0.4 kgf-m or 3.1 ft.lbs) @ 6000 RPM.

How much does the Benelli Pepe 50 weigh?

The 2009 Benelli Pepe 50 has a Dry weight of 82.0 kg (180.8 pounds).

Shop this bike

Affiliate links

We may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.

Similar bikes

Same category, weighted similarity

More Benelli Motorcycles