What category is the 2010 Derbi Senda Baja 125R?

The 2010 Derbi Senda Baja 125R has a Category of Enduro / offroad.

What is the engine size of the 2010 Derbi Senda Baja 125R?

The 2010 Derbi Senda Baja 125R has a Capacity: of 124.10 ccm (7.57 cubic inches).

What type of engine does the 2010 Derbi Senda Baja 125R have?

The 2010 Derbi Senda Baja 125R has a Engine type of Single cylinder, four-stroke.

Is the 2010 Derbi Senda Baja 125R air cooled or liquid cooled?

The 2010 Derbi Senda Baja 125R has a Cooling system of Air.

How many gears does the 2010 Derbi Senda Baja 125R have?

The 2010 Derbi Senda Baja 125R has a Gearbox of 5-speed.

How much does the 2010 Derbi Senda Baja 125R weigh?

The 2010 Derbi Senda Baja 125R has a Dry weight of 118.0 kg (260.1 pounds).

How much does the 2010 Derbi Senda Baja 125R weigh?

The 2010 Derbi Senda Baja 125R has a Weight incl. oil, gas, etc of 119.0 kg (262.4 pounds).

What is the seat height of the 2010 Derbi Senda Baja 125R?

The 2010 Derbi Senda Baja 125R has a Seat height of 890 mm (35.0 inches) If adjustable, lowest setting..

Derbi Senda Baja 125R - 2010 Specifications and Reviews

Name: 2010 Derbi Senda Baja 125R
Brand: Derbi

The 2010 Derbi Senda Baja 125R is a lightweight dual-sport motorcycle designed for novice and recreational riders seeking affordable off-road capability. Known for its nimble handling and low seat height, it excels in mixed terrain riding with moderate performance demands. The electric starter and manageable 119 kg weight make it accessible for younger or less experienced riders.

⇄ Compare 📅 All Years

2011

2010

2009

❮❯

Add/Upload pictures for this motorcycle

General information
Category	Enduro / offroad
Year	2010
Model	Derbi Senda Baja 125R
Engine and Transmission Specifications
Clutch	Multiplate
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Lubrication system	Wet sump
Ignition	CDI
Fuel system	Carburettor. 26 mm
Valves per cylinder	2
Bore x stroke	56.5 x 49.5 mm (2.2 x 1.9 inches)
Compression	9.2:1
Engine type	Single cylinder, four-stroke
Capacity:	124.10 ccm (7.57 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc
Front brakes diameter	260 mm (10.2 inches)
Front brakes	Single disc
Rear tyre dimensions	110/80-18
Front tyre dimensions	80/90-21
Rear suspension travel	200 mm (7.9 inches)
Rear suspension	Monoshock.
Front suspension travel	195 mm (7.7 inches)
Front suspension	41mm hydraulic fork.
Physical measures and capacities
Oil capacity	1.00 litres (0.07 quarts)
Reserve fuel capacity	1.50 litres (0.40 gallons)
Fuel capacity	8.00 litres (2.11 gallons)
Wheelbase	1,452 mm (57.2 inches)
Seat height	890 mm (35.0 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	119.0 kg (262.4 pounds)
Dry weight	118.0 kg (260.1 pounds)
Other specs
Color options	Red/black/gray
Starter	Electric

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 890mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2010 Derbi Senda Baja 125R, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →