Harley-Davidson FLHT Electra Glide Standard - 2002 Specifications and Reviews

The 2002 Harley-Davidson FLHT Electra Glide Standard is a heavyweight cruising tourer built for long-distance comfort and classic styling. Its 1450cc V-twin engine delivers smooth, low-end torque ideal for highway cruising, while the spacious seat and generous wheelbase suit riders seeking relaxed, stable touring. Known for iconic Harley heritage and reliable performance, it appeals to experienced cruiser enthusiasts prioritizing comfort over sportiness.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryTouring
Year2002
ModelHarley-Davidson FLHT Electra Glide Standard

Engine and Transmission Specifications

Transmission typefinal driveBelt
Cooling systemAir
Fuel systemCarburettor
Bore x stroke95.3 x 101.6 mm (3.8 x 4.0 inches)
Compression8.9:1
Torque110.00
Stroke4
Engine typeV2
Capacity:1450.00 ccm (88.48 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,612 mm (63.4 inches)
Ground clearance130 mm (5.1 inches)
Overall length2,378 mm (93.6 inches)
Seat height693 mm (27.3 inches) If adjustable, lowest setting.
Dry weight344.1 kg (758.6 pounds)
 
 

Harley-Davidson FLHT Electra Glide Standard dimensions and frame

Rear brakes diameter292 mm (11.5 inches)
Rear brakesSingle disc
Front brakes diameter292 mm (11.5 inches)
Front brakesDual disc

Speed and acceleration

Reserve fuel capacity3.40 litres (0.90 gallons)
Fuel capacity18.90 litres (4.99 gallons)

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 693mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2002 Harley-Davidson FLHT Electra Glide Standard, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.

⚠ Safety Recalls (1)

EXTERIOR LIGHTING Jan 2002 · 02V002000

ON CERTAIN MOTORCYCLES, THE CLIPS THAT RETAIN THE WIRING FOR THE FRONT FENDER TIP LIGHT CAN BECOME DETACHED FROM THE FENDER, CAUSING THE WIRES TO FRAY AND SHORT.

Risk: THIS COULD CAUSE THE LIGHTING SYSTEM FUSE TO BLOW, LEAVING THE VEHICLE WITHOUT AN OPERATIONAL FRONT FENDER TIP LIGHT, HEADLIGHT, TAILLIGHT, RUNNING LIGHTS, AND PASSING LAMPS (IF EQUIPPED).

Remedy: DEALERS WILL REPLACE THE FENDER TIP LIGHT WIRING HARNESS RETENTION CLIPS, AND INSPECT AND REPLACE, IF NECESSARY, ANY DAMAGED WIRING HARNESSES. OWNER NOTIFICATION BEGAN JANUARY 9, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HARLEY-DAVIDSON AT 1-414-342-4680.

Source: NHTSA. View all Harley-Davidson recalls →