1999 Harley-Davidson FXDWG Dyna Wide Glide

+ Add a photo

Cruisers

1999Harley-Davidson FXDWG Dyna Wide Glide

31 fields on record

The 1999 Harley-Davidson FXDWG Dyna Wide Glide is a cruiser built for riders seeking classic styling with modern performance. Its 1338cc V-twin engine delivers solid torque for relaxed highway riding, while the wide front end and low-slung profile define its iconic stance. Known for aggressive aesthetics and comfortable cruising, it appeals to riders prioritizing style and character over pure power.

Capacity: 1338.0 ccm
Engine: V-Twin, four-stroke
Gearbox: 5-speed
Dry weight: 271.0 kg
Seat height: 679 mm
Power: 56.0 HP (41.2 kW)

⇄ Compare with another bike All model years ⚠ Recalls listed (2)

Other years 1999 2000 2007 2008 2009 2010 2011 2012

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail10%

Cornering35%

City riding45%

Daily riding55%

Touring45%

Two-up55%

Track10%

Best for: Built for laid-back boulevard cruising and show-worthy styling rather than outright speed or distance-eating touring.
Built for: A classic factory custom with a big air-cooled V-twin rumble, chopper-inspired styling, and relaxed, torque-heavy delivery over high-rev performance.
Not ideal for: Not the right choice for riders seeking sharp cornering agility, off-road capability, or long-haul touring comfort.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 679mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 1999 Harley-Davidson FXDWG Dyna Wide Glide, with a cramped knee angle of around 75 degrees and an upright riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1338.0 ccm
Power: 56.0 HP (41.2 kW)
Torque: 97.0 Nm (9.9 kgf-m)
Engine type: V-Twin, four-stroke
Power/weight ratio: 0.2066 HP/kg (dry)
Bore x stroke: 88.8 x 111.3 mm
Compression: 8.5:1
Cooling system: Air
Fuel system: Injection
Starting: Electric
Valves per cylinder: 2

Transmission

Gearbox: 5-speed
Transmission type: Manual
Final drive: Belt
Clutch: Multi-plate with diaphragm spring in oil bath

Performance

Top speed: 160.0 km/h (99.4 mph)

Dimensions & weight

Wheelbase: 1678 mm
Seat height: 679 mm
Dry weight: 271.0 kg
Wet weight: 293.0 kg
Fuel capacity: 19.70 litres
Front percentage of weight: 43

Chassis & suspension

Front wheel travel: 142 mm
Rear wheel travel: 70 mm

Brakes & wheels

Front brakes: Single disc
Front brakes diameter: 296 mm
Rear brakes: Single disc
Rear brakes diameter: 296 mm
Front tyre: 90/90-21
Rear tyre: 130/90-16

Specs last verified against published sources: September 2026.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	1999	2007	2009	2010	2012
Capacity	1338 cc	1573 cc	1573 cc	1573 cc	1688 cc
Dry weight	271 kg	295 kg	295 kg	294 kg	295 kg
Seat height	679 mm	724 mm	724 mm	648 mm	648 mm
Fuel capacity	19.7 L	19.3 L	19.3 L	17.8 L	17.8 L

Illustrative - generated automatically by diffing the year records already on file, not a manufacturer-published changelog.

Safety Recalls

⚠ 2 recalls may apply

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLYJul 1999 · 99V200000

VEHICLE DESCRIPTION: MOTORCYCLES. THESE MOTORCYCLES WERE BUILT WITH A FUEL TANK VENT FITTING THAT COULD BE PLUGGED ALLOWING THE CARBURETOR TO OVERFLOW FUEL.

Risk: THIS COULD RESULT IN A FIRE.

Remedy: DEALERS WILL INSPECT THE FUEL TANK VENT FITTING AND, IF PLUGGED, WILL CORRECT THIS CONDITION.

ENGINE AND ENGINE COOLING:ENGINE:GASOLINEJan 1999 · 99V003000

VEHICLE DESCRIPTION: MOTORCYCLES. THE ENGINE CAM BOLT CAN LOSE ITS CLAMP LOAD AND/OR BREAK.

Risk: THIS CONDITION CAN CAUSE THE ENGINE TO QUIT RUNNING WITH OR WITHOUT PRIOR WARNING. IN SOME INSTANCES, THE ENGINE COULD RUN ERRATICALLY BEFORE QUITTING.

Remedy: DEALERS WILL REPLACE THE ENGINE CAM BOLTS AND WASHERS.

These recalls cover some 1999 bikes of this model. Whether one applies to a specific bike, and whether the repair has already been done, depends on its VIN — check your VIN with NHTSA or ask a dealer.

Source: NHTSA. View all Harley-Davidson recalls →