Suzuki DR125SM - 2012 Specifications and Reviews

The 2012 Suzuki DR125SM is a lightweight supermoto designed for beginner and intermediate riders seeking nimble urban performance. Its 124cc single-cylinder engine delivers accessible power with responsive handling, making it ideal for commuting and learning advanced riding techniques. Known for reliability and affordability, the DR125SM excels in tight city environments and recreational off-road exploration.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategorySuper motard
Year2012
ModelSuzuki DR125SM
 
 

Engine and Transmission Specifications

Driveline5-speed constant mesh
Transmission type,final driveChain
Gearbox5-speed
Cooling systemAir
IgnitionElectronic
Fuel systemInjection
Bore x stroke57.0 x 48.8 mm (2.2 x 1.9 inches)
Compression9.2:1
Engine typeSingle cylinder, four-stroke
Capacity:124.00 ccm (7.57 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions130/70-M17
Front tyre dimensions100/80-M17
Rear suspensionSwing arm type, coil spring, oil and gas damped
Front suspensionTelescopic, coil spring, oil damped

Physical measures and capacities

Fuel capacity9.00 litres (2.38 gallons)
Overall length2,035 mm (80.1 inches)
Overall height1,135 mm (44.7 inches)
Seat height836 mm (32.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc130.0 kg (286.6 pounds)

Other specs

CommentsItalian brand.
InstrumentsElectronic/analogical rev counter and speedometer with multifunctional LCD display
Reserve fuel capacity4.50 litres (1.19 gallons)
Wheelbase1,470 mm (57.9 inches)
Ground clearance162 mm (6.4 inches)
Overall width865 mm (34.1 inches)
Power/weight ratio0.5909 HP/kg
Dry weight198.0 kg (436.5 pounds)
WheelsExcel spoke rims with aluminium channel
Rear brakes diameter220 mm (8.7 inches)
Front brakes diameter320 mm (12.6 inches)
Rear tyre180/55-R17
Front tyre120/70-R17
Rear wheel travel150 mm (5.9 inches)
Rear SuspensionOval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank
Front wheel travel150 mm (5.9 inches)
Front SuspensionMarzocchi upside-down fork
Trail100 mm (3.9 inches)
Rake (fork angle)24.5°
Frame typeVerlicchi high strength steel tube tellis frame
Exhaust system3-way catalytic converter with oxygen sensor.
Emission detailsEuro 3.
ClutchWet, multi-plate
Lubrication systemForced with trochoidal pump
Fuel controlDouble Overhead Cams/Twin Cam (DOHC)
Valves per cylinder4
Bore x Stroke107.0 x 66.0 mm (4.2 x 2.6 inches)
Torque102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 RPM
Power117.00 HP (85.4 kW) @ 8500 RPM
Engine details87 degree V-twin
Capacity:1187.00 ccm (72.43 cubic inches)
ModelMoto Morini 9 1-2
Color optionsWhite, black
Factory warranty12 months
StarterElectric

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 836mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2012 Suzuki DR125SM, with a relaxed knee angle of around 130 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.