Naked Motorcycles

2007Aprilia SL 750 Shiver

38 fields on record

The 2007 Aprilia SL 750 Shiver is a middleweight naked bike designed for riders seeking an agile, street-focused machine with genuine performance credentials. Powered by a 749cc V-twin engine producing 95 horsepower and equipped with advanced ride-by-wire fuel injection, the Shiver excels as a versatile daily commuter and weekend canyon carver. Its blend of Italian styling, manageable power delivery, and nimble handling make it ideal for both experienced enthusiasts and newer riders transitioning to larger displacement bikes.

Capacity: 749.9 ccm
Engine: Parallel Twin, four-stroke
Gearbox: 6-speed
Dry weight: 189.0 kg
Seat height: 810 mm
Power: 95.0 HP (69.9 kW)

⇄ Compare with another bike ＋ Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail15%

Cornering85%

City riding75%

Daily riding72%

Touring40%

Two-up45%

Track55%

Best for: Designed for spirited street riding and twisty backroads where its light weight and torquey V-twin shine.
Built for: Feels like an agile, growly Italian street brawler with sharp handling and strong midrange punch.
Not ideal for: Not ideal for long-distance touring or passenger comfort due to its firm suspension, small tank, and minimal wind protection.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 810mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2007 Aprilia SL 750 Shiver, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 749.9 ccm
Power: 95.0 HP (69.9 kW)
Torque: 8.3 Nm (0.8 kgf-m) @ 7000 RPM
Engine type: Parallel Twin, four-stroke
Power/weight ratio: 0.5026 HP/kg (dry)
Bore x stroke: 92.0 x 56.4 mm
Compression: 11.0:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: Digital electronic, integrated with the injection
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Multi-plate in oil bath, hydraulically operated.

Dimensions & weight

Wheelbase: 1440 mm
Overall length: 2265 mm
Overall width: 800 mm
Overall height: 1135 mm
Seat height: 810 mm
Dry weight: 189.0 kg
Fuel capacity: 15.00 litres

Chassis & suspension

Frame: Modular steel trellis connected with high strength bolts to cast aluminium side plates. Modular steel trellis connected with high strength bolts to cast aluminium side plates. Detachable rear sub frame.
Front suspension: 43 mm upside-down fork.
Rear suspension: Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping
Front wheel travel: 120 mm
Rear wheel travel: 130 mm
Rake (fork angle): 25.7°
Trail: 109 mm

Brakes & wheels

Front brakes: Double disc. Double stainless steel floating disc (Ø 320 mm ) with four piston radially mounted calipers. Metal braided brake line
Front brakes diameter: 320 mm
Rear brakes: Single disc. Stainless steel disc ( 245 mm) with single piston caliper. Metal braided brake line.
Rear brakes diameter: 245 mm
Front tyre: 120/70-17
Rear tyre: 180/55-17