46,153 bikes · 505 makes Add a bikeLog inRegister
Cruisers

2027BSA Bantam Bobber 350

Rate this bike
Click to vote

21 fields on record

The 2027 BSA Bantam Bobber 350 is a low-slung bobber on the Bantam 350 platform, with a 334cc single in a softer tune making 28 hp at 8,000 rpm and 26.4 Nm. Its 742 mm seat is one of the lowest in its class, and it weighs 189 kg wet.

Capacity
334.0 ccm
Engine
Single, four-stroke
Gearbox
6-speed
Wet weight
189.0 kg
Seat height
742 mm
Power
28.2 HP (21.0 kW) @ 8000 RPM
⇄ Compare with another bike + Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested
Speed 25Agility 30Comfort 60Off-road 5Touring 55Road manners 30
Off-road & trail5%
Cornering25%
City riding40%
Daily riding45%
Touring55%
Two-up50%
Track10%
Best for
Cruiser built for its class - everyday, practical use.
Built for
A cruiser from BSA, built around a 334cc engine - a real production model, but this profile is formula-generated from its class and spec sheet rather than individually reviewed.
Not ideal for
Not for serious performance or off-road use.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us
At 742mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2027 BSA Bantam Bobber 350, with a moderate knee angle of around 115 degrees and an upright riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine
Capacity
334.0 ccm
Power
28.2 HP (21.0 kW) @ 8000 RPM
Torque
26.4 Nm (2.7 kgf-m) @ 6000 RPM
Engine type
Single, four-stroke
Power/weight ratio
0.1492 HP/kg (wet)
Compression
11.0:1
Cooling system
Liquid
Starting
Electric
Transmission
Gearbox
6-speed
Transmission type
Manual
Dimensions & weight
Wheelbase
1440 mm
Seat height
742 mm
Wet weight
189.0 kg
Fuel capacity
13.00 litres
Dry weight
Not on record - add it
Chassis & suspension
Front suspension
Non-adjustable telescopic forks, 135mm travel
Rear suspension
Twin shocks, 5-step adjustable preload, 100mm travel
Brakes & wheels
Front brakes
Single disc. 320 mm. Floating caliper.
Rear brakes
Single disc. 240 mm. Floating hydraulic caliper.
Front tyre
100/90-R18
Rear tyre
150/70-R17

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

Rider Reviews

—
☆☆☆☆☆
Be the first to rate

Own one? Add it to My Garage and write an owner review with an Owner badge.

Common questions

What is the engine size of the BSA Bantam Bobber 350?

The 2027 BSA Bantam Bobber 350 has a Capacity of 334.0 ccm (20.38 cubic inches).

What engine power does the BSA Bantam Bobber 350 have?

The 2027 BSA Bantam Bobber 350 has a Power of 28.2 HP (21.0 kW) @ 8000 RPM.

How many gears does the BSA Bantam Bobber 350 have?

The 2027 BSA Bantam Bobber 350 has a Gearbox of 6-speed.

What is the torque of the BSA Bantam Bobber 350?

The 2027 BSA Bantam Bobber 350 has a Torque of 26.4 Nm (2.7 kgf-m or 19.5 ft.lbs) @ 6000 RPM.

How much does the BSA Bantam Bobber 350 weigh?

The 2027 BSA Bantam Bobber 350 has a Wet weight of 189.0 kg (416.7 pounds).

Shop this bike

Affiliate links

We may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.

More BSA Motorcycles