KTM 690 Rally Replica - 2010 Specifications and Reviews

The 2010 KTM 690 Rally Replica is a lightweight single-cylinder enduro designed for adventure riders seeking genuine off-road capability with street versatility. Powered by a 654cc four-stroke engine producing 62 horsepower, it excels in mixed terrain riding with its liquid-cooled efficiency and six-speed transmission. Best known for its nimble handling and fuel efficiency, this machine suits riders prioritizing maneuverability over raw power.

2010
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year2010
ModelKTM 690 Rally Replica
 
 

Engine and Transmission Specifications

ClutchAPTC slipper clutch, hydraulically operated
Transmission type,final driveChain
Gearbox6-speed
Cooling systemLiquid
Lubrication systemPressure lubrication with 2 Eaton pumps
Fuel controlOHC
Valves per cylinder4
Bore x stroke102.0 x 80.0 mm (4.0 x 3.1 inches)
Compression11.8:1
Torque64.00 Nm (6.5 kgf-m or 47.2 ft.lbs) @ 6000
Power62.08
Engine typeSingle cylinder, four-stroke
Capacity:654.00 ccm (39.91 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions140/80-18
Front tyre dimensions90/90-21
Rear suspension travel275 mm (10.8 inches)
Rear suspensionWP mono shock with Pro Lever Linkage
Front suspension travel275 mm (10.8 inches)
Front suspensionWP USD
Frame typeChromium-Molybdenum trellis frame, powder coated

Physical measures and capacities

Fuel capacity12.00 litres (3.17 gallons)
Wheelbase1,498 mm (59.0 inches)
Ground clearance300 mm (11.8 inches)
Seat height930 mm (36.6 inches) If adjustable, lowest setting.
Power/weight ratio0.4482 HP/kg
Dry weight138.5 kg (305.3 pounds)

Other specs

Color optionsOrange
StarterElectric

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 930mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2010 KTM 690 Rally Replica, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.