Cruisers

2010Victory Hammer 8-Ball

36 fields on record

The 2010 Victory Hammer 8 Ball is a aggressive custom cruiser designed for riders seeking distinctive styling and raw character. Powered by a 1639cc V-twin engine producing 85 horsepower, it delivers classic cruiser torque with modern fuel injection reliability. Known for its blacked-out appearance and commanding presence, this bike suits experienced cruiser enthusiasts who value individuality.

Capacity: 1638.8 ccm
Engine: V-Twin, four-stroke
Gearbox: 5-speed
Dry weight: 304.8 kg
Seat height: 660 mm
Power: 85.0 HP (63.4 kW)

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2010 2011 2012 2013 2014 2015

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering30%

City riding45%

Daily riding55%

Touring45%

Two-up40%

Track15%

Best for: Built for straight-line muscle-cruiser attitude and torque-driven street presence rather than cornering finesse or distance touring.
Built for: A brash, torque-heavy power cruiser that favors bold acceleration, deep exhaust note, and aggressive styling over agility or long-haul refinement.
Not ideal for: Not a good fit for riders seeking a nimble commuter, an off-road capable machine, or a plush long-distance touring platform.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 660mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Victory Hammer 8-Ball, with a cramped knee angle of around 70 degrees and an upright riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1638.8 ccm
Power: 85.0 HP (63.4 kW)
Torque: 143.7 Nm (14.7 kgf-m)
Engine type: V-Twin, four-stroke
Power/weight ratio: 0.2789 HP/kg (dry)
Bore x stroke: 101.0 x 108.0 mm
Compression: 9.4:1
Cooling system: Oil & air
Fuel system: Injection
Starting: Electric
Valves per cylinder: 4

Transmission

Gearbox: 5-speed
Transmission type: Manual
Final drive: Belt
Clutch: Wet, multi-plate

Dimensions & weight

Wheelbase: 1669 mm
Overall length: 2365 mm
Seat height: 660 mm
Dry weight: 304.8 kg
Fuel capacity: 17.00 litres
Ground clearance: 135 mm
Oil capacity: 5.00 litres

Chassis & suspension

Front suspension: Inverted cartridge telescopic fork, 43 mm diameter
Rear suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Front wheel travel: 130 mm
Rear wheel travel: 76 mm
Rake (fork angle): 32.7°
Trail: 140 mm

Brakes & wheels

Front brakes: Single disc. 4-piston caliper
Front brakes diameter: 300 mm
Rear brakes: Single disc. 2-piston caliper
Rear brakes diameter: 300 mm
Front tyre: 130/70-R18
Rear tyre: 250/40-R18

Other

Color options: Solid Black

Specs last verified against published sources: September 2026.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2010	2011	2013	2014	2015
Capacity	1639 cc	1731 cc	1737 cc	1737 cc	1737 cc
Dry weight	305 kg	305 kg	305 kg	305 kg	305 kg
Seat height	660 mm	660 mm	660 mm	660 mm	660 mm
Fuel capacity	17 L	17 L	17 L	17 L	17 L