What category is the 2013 Benelli Pepe 4T?

The 2013 Benelli Pepe 4T has a Category of Scooter.

What is the engine size of the 2013 Benelli Pepe 4T?

The 2013 Benelli Pepe 4T has a Capacity: of 49.00 ccm (2.99 cubic inches).

What type of engine does the 2013 Benelli Pepe 4T have?

The 2013 Benelli Pepe 4T has a Engine type of Single cylinder, four-stroke.

What is the engine power of the 2013 Benelli Pepe 4T?

The 2013 Benelli Pepe 4T has a Power of 4.75.

What is the torque of the 2013 Benelli Pepe 4T?

The 2013 Benelli Pepe 4T has a Torque of 4.20 Nm (0.4 kgf-m or 3.1 ft.lbs).

Is the 2013 Benelli Pepe 4T air cooled or liquid cooled?

The 2013 Benelli Pepe 4T has a Cooling system of Air.

How much does the 2013 Benelli Pepe 4T weigh?

The 2013 Benelli Pepe 4T has a Dry weight of 82.0 kg (180.8 pounds).

What is the seat height of the 2013 Benelli Pepe 4T?

The 2013 Benelli Pepe 4T has a Seat height of 770 mm (30.3 inches) If adjustable, lowest setting..

Benelli Pepe 4T - 2013 Specifications and Reviews

Name: 2013 Benelli Pepe 4T
Brand: Benelli

⇄ Compare against another bike 📅 All Years

2013

Add/Upload pictures for this motorcycle

General information
Year	2013
Engine and Transmission Specifications
Clutch	Wet, cable operated
Transmission type,final drive	Belt
Cooling system	Air
Lubrication system	Wet sump
Fuel control	SOHC
Fuel system	Carburettor
Valves per cylinder	4
Bore x stroke	40.0 x 0.0 mm (1.6 x inches)
Compression	7.5:1
Torque	4.20 Nm (0.4 kgf-m or 3.1 ft.lbs)
Power	4.75
Engine type	Single cylinder, four-stroke
Capacity:	49.00 ccm (2.99 cubic inches)

Category	Scooter
Model	Benelli Pepe 4T

Brakes, suspension, Frame and wheels
Rear brakes diameter	110 mm (4.3 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc
Rear suspension	Monshock
Front suspension	Cartridge fork
Physical measures and capacities
Fuel capacity	7.50 litres (1.98 gallons)
Wheelbase	1,285 mm (50.6 inches)
Ground clearance	1,020 mm (40.2 inches)
Overall width	710 mm (28.0 inches)
Overall length	1,875 mm (73.8 inches)
Seat height	770 mm (30.3 inches) If adjustable, lowest setting.
Power/weight ratio	0.0579 HP/kg
Dry weight	82.0 kg (180.8 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric

Performance Profile & Rider Fit

4.8 hp

Peak Power

Best For

Track5%

City90%

Cornering30%

Daily Riding75%

Touring10%

Passenger20%

Rider Profile

Best For	This scooter is ideal for absolute beginners or anyone who has never ridden before and wants a simple, low-risk introduction to two wheels.
Purpose	It's built purely for short-hop urban commuting and running errands around town at low speeds.
Rider Fit	Its low seat height and light weight make it easy to handle for riders of almost any size or strength, including smaller or less confident riders.
Character	It has a friendly, unintimidating, retro-styled character suited to relaxed, unhurried city cruising rather than performance riding.
Not Ideal For	It is not suitable for highway travel, long-distance touring, carrying a passenger any real distance, or riders seeking speed and excitement.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 770mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2013 Benelli Pepe 4T, with a moderate knee angle of around 95 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →