Naked Motorcycles

2013Benelli TNT 1130 R

44 fields on record

The 2013 Benelli TNT 1130 R is a high-performance naked bike from Italy with a distinctive triple engine. Its liquid-cooled 1,131cc inline triple makes 157.8 hp and 120 Nm through a six-speed gearbox. An 830 mm seat, 218 kg wet weight and 17-litre tank give it a muscular presence.

Capacity: 1131.0 ccm
Engine: In-line three-cylinder, four-stroke
Gearbox: 6-speed
Dry weight: 208.0 kg
Seat height: 830 mm
Power: 157.8 HP (115.2 kW) @ 10200 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2012 2013 2014 2015 2016 2017

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering90%

City riding45%

Daily riding40%

Touring30%

Two-up30%

Track88%

Best for: Built for fast, aggressive road riding and canyon carving where its brutal top-end power and sharp chassis can be fully exploited.
Built for: A raw, hard-edged Italian streetfighter that rewards confident throttle control with explosive acceleration and razor-sharp handling.
Not ideal for: Not suited to nervous beginners, long-distance comfort seekers, or anyone wanting a relaxed, upright commuting experience.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 830mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2013 Benelli TNT 1130 R, with a relaxed knee angle of around 130 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1131.0 ccm
Power: 157.8 HP (115.2 kW) @ 10200 RPM
CO2 Emissions: 3 CO2 g/km
Torque: 120.0 Nm (12.2 kgf-m) @ 8400 RPM
Engine type: In-line three-cylinder, four-stroke
Power/weight ratio: 0.7587 HP/kg (dry)
Bore x stroke: 88.0 x 62.0 mm
Compression: 12.5:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: Walbro ECUA-1
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Dry clutch with hydraulic command with slipper device

Dimensions & weight

Wheelbase: 1443 mm
Overall length: 2100 mm
Overall width: 790 mm
Overall height: 1050 mm
Seat height: 830 mm
Dry weight: 208.0 kg
Wet weight: 218.0 kg
Fuel capacity: 17.00 litres
Ground clearance: 135 mm
Oil capacity: 4.00 litres
Reserve fuel capacity: 4.00 litres

Chassis & suspension

Frame: Decomposable, front steel trestle, rear aluminium alloy casting
Front suspension: 50 mm upside-down fork, with hydraulic rebound / compression and spring preload adjustments
Rear suspension: Steel tube trestle swingarm, rear dumper with hydraulic adjustment (rebound, high and low speed compression) and spring preload assembled with progressive link
Front wheel travel: 120 mm
Rear wheel travel: 120 mm
Rake (fork angle): 25.0°
Trail: 95 mm

Brakes & wheels

Front brakes: Double disc. Floating Wave disk mm with radial monoblock 4 pistons calipers
Front brakes diameter: 320 mm
Rear brakes: Single disc. Wave disk with double piston caliper
Rear brakes diameter: 240 mm
Front tyre: 120/70-17
Rear tyre: 180/55-17

Other

Color options: White/red

Specs last verified against published sources: October 2026.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2012	2013	2015	2016	2017
Capacity	1131 cc	1131 cc	1131 cc	1131 cc	1131 cc
Dry weight	208 kg	208 kg	205 kg	205 kg	205 kg
Seat height	830 mm	830 mm	830 mm	830 mm	830 mm
Fuel capacity	17 L	17 L	16 L	16 L	16 L