What category is the 2019 Benelli TRK 502 X?

General information
Category	Allround
Model	Benelli TRK 502 X
Year	2019

Engine and Transmission Specifications
Emission details	Euro 4. Catalytic converter and oxygen sensors.
Greenhouse gases	90.5 CO2 g/km. (CO2 - Carbon dioxide emission)
Fuel consumption	3.90 litres/100 km (25.6 km/l or 60.31 mpg)
Clutch	Wet
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Wet sump
Ignition	TLI
Fuel control	Double Overhead Cams/Twin Cam (DOHC)
Fuel system	Injection
Valves per cylinder	4
Bore x Stroke	69.0 x 66.8 mm (2.7 x 2.6 inches)
Compression	11.5:1
Torque	45.00 Nm (4.6 kgf-m or 33.2 ft.lbs) @ 5000 RPM
Power	47.60 HP (34.7 kW) @ 8500 RPM
Engine type	Twin, four-stroke
Capacity:	499.60 ccm (30.49 cubic inches)
Brakes, suspension, Frame and wheels
Wheels	Aluminum alloy (optional aluminium rim spoked )
Rear brakes diameter	260 mm (10.2 inches)
Rear brakes	Single disc. Single piston calliper, ABS
Front brakes diameter	320 mm (12.6 inches)
Front brakes	Double disc. 4-piston, ABS
Rear tyre	150/70-R17
Front tyre	110/80-R19
Rear wheel travel	50 mm (2.0 inches)
Rear Suspension	Rear swing arm with central shock absorber spring preload adjustable
Front wheel travel	145 mm (5.7 inches)
Front Suspension	Upside-down forks
Frame type	Trestle in steel tubes
Physical measures and capacities
Reserve fuel capacity	3.00 litres (0.79 gallons)
Fuel capacity	20.00 litres (5.28 gallons)
Wheelbase	1,525 mm (60.0 inches)
Overall width	915 mm (36.0 inches)
Overall length	2,200 mm (86.6 inches)
Overall height	1,490 mm (58.7 inches)
Alternate seat height	825 mm (32.5 inches) If adjustable, highest setting.
Seat height	840 mm (33.1 inches) If adjustable, lowest setting.
Power/weight ratio	0.2235 HP/kg
Dry weight	213.0 kg (469.6 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric
Color options	Silver

Performance Profile & Rider Fit

47.6 hp

Peak Power

5.8s

0-60 mph

Best For

Track20%

City60%

Cornering50%

Daily Riding65%

Touring72%

Passenger65%

Rider Profile

Best For	Suits new-to-intermediate riders thanks to modest power delivery and a manageable, forgiving chassis.
Purpose	Built as an adventure-styled allrounder for mixed commuting, light touring, and occasional gravel roads rather than outright performance.
Rider Fit	The 860mm seat height and 235kg wet weight make it manageable for average-height riders but noticeable at a standstill or on uneven ground.
Character	A friendly, torque-light twin that feels approachable and steady rather than exciting, with adventure-bike looks and everyday usability.
Not Ideal For	Not suited to riders chasing high-speed thrills or serious technical off-road adventures given its modest power and street-biased suspension travel.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 840mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2019 Benelli TRK 502 X, with a relaxed knee angle of around 135 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →