Sportbikes

2015Bimota Tesi 3D Naked

38 fields on record

The 2015 Bimota Tesi 3D Naked is an exotic Italian bike with hub-centre front steering. Its oil- and air-cooled 1,079cc V-twin makes 98 hp at 7,500 rpm and 105 Nm through a six-speed gearbox. An 800 mm seat, 166 kg dry weight and 16-litre tank make it light and unusual.

Capacity: 1079.0 ccm
Engine: V-Twin, four-stroke
Gearbox: 6-speed
Dry weight: 166.0 kg
Seat height: 800 mm
Power: 98.0 HP (71.5 kW) @ 7500 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2013 2014 2015 2016 2017

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering97%

City riding45%

Daily riding40%

Touring30%

Two-up15%

Track90%

Best for: Built for carving twisty roads and showcasing exotic Italian engineering rather than for practical everyday transport.
Built for: An exclusive, boutique hand-built Italian exotic that trades mainstream convenience for razor-sharp, feedback-rich handling and rarity.
Not ideal for: Not for riders seeking a comfortable, low-maintenance daily commuter or a bike suited to long-distance touring or passengers.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 800mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2015 Bimota Tesi 3D Naked, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1079.0 ccm
Power: 98.0 HP (71.5 kW) @ 7500 RPM
Torque: 105.0 Nm (10.7 kgf-m) @ 9000 RPM
Engine type: V-Twin, four-stroke
Power/weight ratio: 0.5904 HP/kg (dry)
Bore x stroke: 98.0 x 71.5 mm
Compression: 10.5:1
Cooling system: Oil & air
Fuel system: Injection
Starting: Electric
Valves per cylinder: 2

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Dry Clutch, multi-disc

Dimensions & weight

Wheelbase: 1390 mm
Overall length: 2010 mm
Overall width: 720 mm
Overall height: 1120 mm
Seat height: 800 mm
Dry weight: 166.0 kg
Fuel capacity: 16.00 litres
Reserve fuel capacity: 5.00 litres

Chassis & suspension

Frame: Made of two omega shaped lightweight alloy plates
Front suspension: Swing arm. Monoshock, Pull-Rod Extreme Tech, fully adjustable (Preload - External Hydraulic device, Compression, Rebound,
Rear suspension: Swing arm. Extreme Tech Mono Shock fully adjustable,
Front wheel travel: 115 mm
Rear wheel travel: 120 mm
Rake (fork angle): 20.5°

Brakes & wheels

Front brakes: Double disc. 4-piston
Front brakes diameter: 320 mm
Rear brakes: Single disc. 2-piston
Rear brakes diameter: 220 mm
Front tyre: 120/70-17
Rear tyre: 180/55-17

Other

Color options: Red/white
Comments: Italian brand.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2013	2014	2015	2016	2017
Capacity	1079 cc	1079 cc	1079 cc	1079 cc	1078 cc
Dry weight	166 kg	166 kg	166 kg	166 kg	167 kg
Seat height	800 mm	800 mm	800 mm	800 mm	800 mm
Fuel capacity	16 L	16 L	16 L	16 L	16 L