What category is the 2007 Harley-Davidson Road King Classic?

General information
Category	Custom / cruiser
Model	Harley-Davidson Road King Classic
Year	2007

Engine and Transmission Specifications
Transmission type,final drive	Belt
Gearbox	5-speed
Cooling system	Air
Fuel system	Injection
Valves per cylinder	2
Bore x stroke	95.3 x 101.6 mm (3.8 x 4.0 inches)
Top speed	155.0 km/h (96.3 mph)
Torque	110.00 Nm (11.2 kgf-m or 81.1 ft.lbs) @ 3100
Power	67.00
Engine type	V2, four-stroke
Capacity:	1449.00 ccm (88.42 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes diameter	292 mm (11.5 inches)
Rear brakes	Single disc
Front brakes diameter	292 mm (11.5 inches)
Front brakes	Dual disc
Rear suspension travel	76 mm (3.0 inches)
Front suspension travel	117 mm (4.6 inches)

Physical measures and capacities
Fuel capacity	18.90 litres (4.99 gallons)
Wheelbase	1,612 mm (63.5 inches)
Seat height	684 mm (26.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	345.0 kg (760.6 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric

Performance Profile & Rider Fit

89 hp

Peak Power

5.5s

0-60 mph

Best For

Track10%

City40%

Cornering35%

Daily Riding55%

Touring95%

Passenger85%

Rider Profile

Best For	Best suited to riders with some experience handling heavy, low-slung motorcycles, as the substantial weight demands confident low-speed control.
Purpose	Built for long-distance highway cruising and classic American touring rather than speed or sport riding.
Rider Fit	A tall and heavy machine that rewards strength and deliberate handling, though its low seat height and relaxed ergonomics ease day-long comfort.
Character	A traditional, torque-rich cruiser with timeless styling, a relaxed riding position, and effortless open-road presence.
Not Ideal For	Not the right choice for riders wanting sharp cornering agility, off-road capability, or lightweight urban maneuverability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 684mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2007 Harley-Davidson Road King Classic, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →