What category is the 1996 Honda CR 125 R?

General information
Category	Cross / motocross
Model	Honda CR 125 R
Year	1996

Engine and Transmission Specifications
Clutch	Wet plate
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Ignition	CDI
Fuel system	Carburettor. Keihin 32 mm
Compression	8.0:1
Max RPM	12000
Torque	20.00 Nm (2.0 kgf-m or 14.8 ft.lbs) @ 10500
Power	31.00
Engine type	Single cylinder, two-stroke
Capacity:	124.00 ccm (7.57 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Expanding brake (drum brake)
Rear tyre dimensions	130/80-18
Front tyre dimensions	90/80-21
Rear suspension	Monoshock
Front suspension travel	310 mm (12.2 inches)
Physical measures and capacities
Fuel capacity	6.00 litres (1.59 gallons)
Wheelbase	1,435 mm (56.5 inches)
Ground clearance	345 mm (13.6 inches)
Overall width	845 mm (33.3 inches)
Overall length	2,115 mm (83.3 inches)
Overall height	1,200 mm (47.2 inches)
Seat height	930 mm (36.6 inches) If adjustable, lowest setting.
Power/weight ratio	0.3605 HP/kg
Dry weight	86.0 kg (189.6 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Modifications compared to previous model	Drivechain has moved to the left side of the bike.
Color options	Red
Starter	Kick

Performance Profile & Rider Fit

Best For

Track85%

City5%

Cornering90%

Daily Riding5%

Touring3%

Passenger0%

Rider Profile

Best For	This is a demanding machine best suited to experienced or competitive off-road riders comfortable with a peaky two-stroke powerband.
Purpose	Built purely for motocross racing on prepared tracks, not for street or general recreational use.
Rider Fit	Requires a fit, athletic rider due to its tall seat height, aggressive suspension, and physically demanding riding position.
Character	A raw, lightweight two-stroke race weapon that rewards aggressive, skilled riding with explosive acceleration and razor-sharp handling.
Not Ideal For	Not suitable for beginners, commuters, or anyone seeking comfort, passenger capability, or road-going practicality.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 930mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 1996 Honda CR 125 R, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →