What category is the 2010 Honda PS125I?

The 2010 Honda PS125I has a Category of Scooter.

What is the engine size of the 2010 Honda PS125I?

The 2010 Honda PS125I has a Capacity: of 125.00 ccm (7.63 cubic inches).

What type of engine does the 2010 Honda PS125I have?

The 2010 Honda PS125I has a Engine type of Single cylinder.

What is the engine power of the 2010 Honda PS125I?

The 2010 Honda PS125I has a Power of 13.00.

What is the torque of the 2010 Honda PS125I?

The 2010 Honda PS125I has a Torque of 11.10.

Is the 2010 Honda PS125I air cooled or liquid cooled?

The 2010 Honda PS125I has a Cooling system of Liquid.

How much does the 2010 Honda PS125I weigh?

The 2010 Honda PS125I has a Dry weight of 156.0 kg (343.9 pounds).

What is the seat height of the 2010 Honda PS125I?

The 2010 Honda PS125I has a Seat height of 776 mm (30.6 inches) If adjustable, lowest setting..

Honda PS125I - 2010 Specifications and Reviews

Name: 2010 Honda PS125I
Brand: Honda

⇄ Compare against another bike 📅 All Years

2010

Add/Upload pictures for this motorcycle

General information
Category	Scooter
Model	Honda PS125i
Year	2010

Engine and Transmission Specifications
Transmission typefinal drive	Belt
Cooling system	Liquid
Starter	Electric
Ignition	Digital transistorised with electronic advanced
Fuel control	SOHC
Fuel system	Injection. PGM-FI electronic fuel injection
Bore x stroke	52.4 x 57.8 mm (2.1 x 2.3 inches)
Compression	11.0:1
Torque	11.10
Power	13.00
Stroke	4
Engine type	Single cylinder
Capacity:	125.00 ccm (7.63 cubic inches)
Physical measures and capacities
Wheelbase	1,490 mm (58.7 inches)
Ground clearance	134 mm (5.3 inches)
Overall width	745 mm (29.3 inches)
Overall length	2,090 mm (82.3 inches)
Overall height	1,435 mm (56.5 inches)
Seat height	776 mm (30.6 inches) If adjustable, lowest setting.
Dry weight	156.0 kg (343.9 pounds)
Honda PS125I dimensions and frame
Rear brakes diameter	130 mm (5.1 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc
Rear tyre dimensions	130/70-M13
Front tyre dimensions	110/90-M13
Rear suspension	Dual-damper unit swingarm, 98.1mm axle travel
Front suspension	33mm telescopic fork, 85.7mm axle travel
Speed and acceleration
Power/weight ratio	0.0833 HP/kg

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Grey, silver, dark red, silver/red
Fuel capacity	9.40 litres (2.48 gallons)

Performance Profile & Rider Fit

13.5 hp

Peak Power

Best For

Track5%

City88%

Cornering40%

Daily Riding82%

Touring22%

Passenger40%

Rider Profile

Best For	Suitable for new and casual riders thanks to its light weight, automatic transmission, and manageable power delivery.
Purpose	Built primarily as an urban commuter scooter for easy, practical transport around town.
Rider Fit	Very approachable for smaller or less experienced riders, with a low seat height and light dry weight making it easy to handle at a stop.
Character	A practical, low-stress runabout that prioritizes convenience and maneuverability over performance or excitement.
Not Ideal For	Not suited to riders wanting highway touring, spirited cornering, or any form of off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 776mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Honda PS125I, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →