What category is the 2010 Honda VTR 250?

General information
Category	Naked bike
Model	Honda VTR 250
Year	2010
Engine and Transmission Specifications
Gearbox	5-speed
Cooling system	Liquid
Fuel control	DOHC
Valves per cylinder	4
Fuel system	Carburettor
Bore x stroke	60.0 x 44.1 mm (2.4 x 1.7 inches)
Compression	11.0:1
Torque	24.00
Power	32.00
Stroke	4
Engine type	V2
Capacity:	249.00 ccm (15.19 cubic inches)

Physical measures and capacities
Wheelbase	1,410 mm (55.5 inches)
Ground clearance	170 mm (6.7 inches)
Overall width	720 mm (28.3 inches)
Overall length	2,040 mm (80.3 inches)
Overall height	1,050 mm (41.3 inches)
Seat height	780 mm (30.7 inches) If adjustable, lowest setting.
Dry weight	140.0 kg (308.6 pounds)

Honda VTR 250 dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	140/70-17 66H
Front tyre dimensions	110/70-17 54H
Speed and acceleration
Power/weight ratio	0.2286 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity	13.00 litres (3.43 gallons)

Performance Profile & Rider Fit

29.5 hp

Peak Power

7.5s

0-60 mph

Best For

Track35%

City80%

Cornering70%

Daily Riding78%

Touring35%

Passenger40%

Rider Profile

Best For	This bike suits new-to-intermediate riders thanks to its modest power delivery and forgiving, light chassis.
Purpose	It's best suited for commuting, learning, and casual weekend rides rather than outright performance.
Rider Fit	The low seat height and lightweight build make it accessible and manageable for shorter or less experienced riders.
Character	The V-twin engine gives it a characterful, torquey feel at low revs despite its small displacement, paired with agile, flickable handling typical of naked bikes.
Not Ideal For	It's not a good fit for riders seeking high-speed touring capability, passenger comfort, or off-road performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 780mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2010 Honda VTR 250, with a moderate knee angle of around 115 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →