What category is the 2021 Italjet Dragster 200?

General information
Category	Scooter
Model	Italjet Dragster 200
Year	2021

Engine and Transmission Specifications
Clutch	C.V.T. with automatic centrifugal multiplate wet clutch
Transmission type	Belt (final drive)
Gearbox	Automatic
Cooling system	Liquid
Lubrication system	Separate mixer
Ignition	CDI Electronic
Fuel system	Carburettor
Bore x Stroke	63.0 x 58.0 mm (2.5 x 2.3 inches)
Torque	17.0 Nm (1.7 kgf-m or 12.5 ft.lbs) @ 6250 RPM
Power	19.8 HP (14.5 kW) @ 8250 RPM
Engine type	Single cylinder, two-stroke
Capacity:	200.0 ccm (12.20 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Single disc
Diameter	175 mm (6.9 inches)
Front brakes	Single disc. ABS
Rear tire	150/70-13
Front tire	120/70-12
Rear Suspension	Single Hydropneumatic Shock Absorber (Adjustable Spring)
Front Suspension	S.I.S. with Single Hydropneumatic Shock Absorber (Adjustable Spring)
Physical measures and capacities
Fuel capacity	9.00 litres (2.38 US gallons)
Wheelbase	1335 mm (52.6 inches)
Overall width	680 mm (26.8 inches)
Overall length	1870 mm (73.6 inches)
Seat height	770 mm (30.3 inches) If adjustable, lowest setting.
Power/weight ratio	0.1768 HP/kg
Dry weight	112.0 kg (246.9 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric

Performance Profile & Rider Fit

17.5 hp

Peak Power

9.5s

0-60 mph

Best For

Track30%

City92%

Cornering80%

Daily Riding75%

Touring30%

Passenger45%

Rider Profile

Best For	Suits riders from confident beginners to experienced scooterists who want a sporty, engaging ride without a steep learning curve.
Purpose	Built for urban commuting and playful backstreet riding rather than distance or utility work.
Rider Fit	Its low seat height and light dry weight make it easy for shorter or less physically strong riders to handle confidently.
Character	A cheeky, performance-styled scooter with race-inspired suspension and sharp handling that rewards spirited, flickable riding.
Not Ideal For	Not a good fit for riders wanting long-distance touring comfort, passenger-friendly space, or any off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 770mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2021 Italjet Dragster 200, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →