What category is the 2011 Italjet Velocifero 50?

General information
Year	2011

Engine and Transmission Specifications
Clutch	Centrifugal-automatic
Transmission typefinal drive	Belt
Gearbox	Automatic
Cooling system	Air
Starter	Electric & kick
Ignition	Electronic
Bore x stroke	40.0 x 39.3 mm (1.6 x 1.5 inches)
Power	5.00
Stroke	4
Engine type	Single cylinder
Capacity:	49.00 ccm (2.99 cubic inches)

Physical measures and capacities
Overall width	745 mm (29.3 inches)
Overall length	1,670 mm (65.7 inches)
Seat height	770 mm (30.3 inches) If adjustable, lowest setting.
Dry weight	72.0 kg (158.7 pounds)
Italjet Velocifero 50 dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	100/90-10
Front tyre dimensions	100/90-10
Rear suspension	Oscillating swinging arm with single hydraulic shock absorber
Front suspension	Elastic with balances trailing link with 2 shock absorbers
Speed and acceleration
Power/weight ratio	0.0694 HP/kg

Category	Scooter
Model	Italjet Velocifero 50
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	English green, Bordeaux, Salmon, Green, Grey
Fuel capacity	6.00 litres (1.59 gallons)

Performance Profile & Rider Fit

3.1 hp

Peak Power

Best For

Track5%

City88%

Cornering40%

Daily Riding65%

Touring8%

Passenger20%

Rider Profile

Best For	Ideal for beginners, learners, or anyone with a moped-class license and little to no prior riding experience.
Purpose	Built purely for short urban hops, errands, and light commuting rather than any kind of performance riding.
Rider Fit	Very light and low, so it suits riders of almost any size or strength, including smaller or less confident riders.
Character	A fun, stylish retro-look 50cc scooter that prioritizes nimble city maneuverability over outright speed.
Not Ideal For	Not suitable for highway travel, touring, carrying a passenger comfortably, or riders wanting real acceleration.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 770mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2011 Italjet Velocifero 50, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →