What category is the 2002 Kawasaki Eliminator 125?

General information
Category	Custom / cruiser
Model	Kawasaki Eliminator 125
Year	2002
Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	5-speed
Valves per cylinder	2
Fuel system	Carburettor
Bore x stroke	55.0 x 52.4 mm (2.2 x 2.1 inches)
Torque	9.70
Power	12.00
Stroke	4
Engine type	Single cylinder
Capacity:	124.00 ccm (7.57 cubic inches)

Physical measures and capacities
Wheelbase	1,470 mm (57.9 inches)
Seat height	680 mm (26.8 inches) If adjustable, lowest setting.
Dry weight	128.0 kg (282.2 pounds)

Kawasaki Eliminator 125 dimensions and frame
Rear brakes diameter	130 mm (5.1 inches)
Rear brakes	Expanding brake
Front brakes diameter	260 mm (10.2 inches)
Front brakes	Single disc
Rear tyre dimensions	130/90-15
Front tyre dimensions	90/90-17
Rear suspension travel	60 mm (2.4 inches)
Front suspension travel	130 mm (5.1 inches)
Speed and acceleration
Power/weight ratio	0.0938 HP/kg
Top speed	100.0 km/h (62.1 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity	13.00 litres (3.43 gallons)

Performance Profile & Rider Fit

Best For

Track10%

City65%

Cornering35%

Daily Riding60%

Touring30%

Passenger35%

Rider Profile

Best For	This bike suits beginner and novice riders thanks to its small single-cylinder engine and light, manageable weight.
Purpose	It's built for relaxed cruiser-style commuting and short leisure rides rather than performance or long-distance touring.
Rider Fit	The low seat height and light 145kg weight make it easy to handle and confidence-inspiring for shorter or less physically strong riders.
Character	It has a laid-back, classic cruiser feel with modest low-end torque and an easygoing, unintimidating riding experience.
Not Ideal For	It's not suited to riders wanting high speed, aggressive cornering, off-road capability, or serious two-up touring comfort.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 680mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2002 Kawasaki Eliminator 125, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →