43,675 bikes · 493 makes Add a bikeLog inRegister
Motocross Bikes

2027Honda CRF450R HRC Works Edition

Rate this bike
Click to vote

35 fields on record

The Honda CRF450R HRC Works Edition continues into the 2027 model year. It's powered by (449.8cc liquid-cooled 10º single-cylinder four-stroke), mated to a Constant-mesh 5-speed; manual gearbox. Chassis hardware includes a 49mm fully adjustable leading-axle inverted telescopic Showa coil-spring fork w/ 12.2 in. travel with 2-piston caliper (30mm, 27mm) hydraulic; single 260mm disc up front, with a claimed weight of 249 lbs. and a 37.8 in seat height.

Capacity
449.5 ccm
Engine
Single, four-stroke
Gearbox
5-speed
Dry weight
102.5 kg
Seat height
953 mm
Power
Not on record
Know it? Add it →
⇄ Compare with another bike + Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested
Speed 62Agility 96Comfort 30Off-road 98Touring 10Road manners 15
Off-road & trail98%
Cornering85%
City riding5%
Daily riding8%
Touring5%
Two-up0%
Track90%
Best for
Built purely for motocross racing and serious off-road riding, not for street use or general transportation.
Built for
A razor-sharp, high-revving, race-bred single-cylinder motocrosser that rewards aggressive input with explosive acceleration and pinpoint handling.
Not ideal for
This is not the right bike for beginners, commuters, passengers, or anyone seeking comfort, storage, or highway touring capability.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us
At 953mm, a rider of 68.9" with a 31" (estimated) inseam will not reach the ground comfortably on the 2027 Honda CRF450R HRC Works Edition, with a cramped knee angle of around 85 degrees and an upright riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at over 900 mm — Sky High →

Find bikes that fit your height →

Full specifications

Engine
Capacity
449.5 ccm
Engine type
Single, four-stroke
Bore x stroke
97.0 x 60.8 mm
Compression
13.8:1
Cooling system
Liquid
Fuel system
Injection
Starting
Electric
Ignition
CDI
Power
Not on record - add it
Transmission
Gearbox
5-speed
Transmission type
Manual
Final drive
Chain
Clutch
Multiplate wet, hydraulically actuated (6 springs, 8 plates)
Dimensions & weight
Wheelbase
1490 mm
Overall length
2200 mm
Overall width
827 mm
Overall height
1263 mm
Seat height
953 mm
Dry weight
102.5 kg
Wet weight
107.9 kg
Fuel capacity
7.10 litres
Ground clearance
333 mm
Chassis & suspension
Front suspension
Showa 49mm USD fork
Rear suspension
Showa 50mm monoshock, Pro-Link
Front wheel travel
310 mm
Rear wheel travel
305 mm
Rake (fork angle)
27.5°
Trail
117 mm
Rake
27.3deg
Brakes & wheels
Front brakes
Single 260 mm petal disc, 2-piston caliper
Front brakes diameter
260 mm
Rear brakes
Single 240 mm petal disc, 1-piston caliper
Rear brakes diameter
240 mm
Front tyre
80/100-21
Rear tyre
120/90-19

Specs last verified against published sources: .

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

Rider Reviews

—
☆☆☆☆☆
Be the first to rate

Own one? Add it to My Garage and write an owner review with an Owner badge.

Common questions

What is the engine size of the Honda CRF450R HRC Works Edition?

The 2027 Honda CRF450R HRC Works Edition has a Capacity of 449.5 ccm (27.43 cubic inches).

How many gears does the Honda CRF450R HRC Works Edition have?

The 2027 Honda CRF450R HRC Works Edition has a Gearbox of 5-speed.

How much does the Honda CRF450R HRC Works Edition weigh?

The 2027 Honda CRF450R HRC Works Edition has a Dry weight of 102.5 kg (226.0 pounds).

Shop this bike

Affiliate links

We may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.

More Honda Motorcycles