2027Triumph Speed Twin 1200 Cafe Racer Edition

Rate this bike

33 fields on record

The 2027 Triumph Speed Twin 1200 Cafe Racer Edition is a limited-run modern classic for experienced riders who want cafe-racer style with serious hardware. Its 1200cc parallel twin makes 103.5 hp and 112 Nm, with a fully adjustable Marzocchi fork, Ohlins twin shocks and Brembo Stylema calipers.

Capacity: 1200.0 ccm
Engine: In-line three-cylinder
Gearbox: 6-speed
Wet weight: 217.0 kg
Seat height: 810 mm
Power: 103.5 HP (77.2 kW) @ 7750 RPM

⇄ Compare with another bike All model years

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail15%

Cornering80%

City riding72%

Daily riding70%

Touring55%

Two-up45%

Track60%

Best for: It's built for spirited road riding and weekend cornering fun, blending retro cafe racer styling with genuinely modern sport-oriented performance underneath.
Built for: It has a sharp, characterful personality thanks to the high-revving three-cylinder engine and 240-degree firing order, delivering an eager top-end pull with a distinctive triple growl.
Not ideal for: This is not the right choice for riders seeking a plush, upright touring machine or anyone planning to take it off-road.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 810mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2027 Triumph Speed Twin 1200 Cafe Racer Edition, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1200.0 ccm
Power: 103.5 HP (77.2 kW) @ 7750 RPM
Torque: 112.0 Nm (11.4 kgf-m) @ 4250 RPM
Engine type: In-line three-cylinder
Power/weight ratio: 0.4770 HP/kg (wet)
Bore x stroke: 97.6 x 80.0 mm
Compression: 12.0:1
Fuel system: Injection

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet, multi-plate, slip & assist

Dimensions & weight

Wheelbase: 1418 mm
Overall length: 2069 mm
Overall width: 828 mm
Overall height: 1395 mm
Seat height: 810 mm
Wet weight: 217.0 kg
Fuel capacity: 14.50 litres
Dry weight: Not on record - add it

Chassis & suspension

Frame: Tubular perimeter frame, steel
Front suspension: Marzocchi 43 mm USD fork, fully adjustable
Rear suspension: Ohlins twin shocks, fully adjustable, remote reservoir
Front wheel travel: 120 mm
Rear wheel travel: 122 mm
Rake (fork angle): 23.1°
Trail: 97 mm

Brakes & wheels

Front brakes: Twin disc, Brembo Stylema M4.30 radial 4-piston
Front brakes diameter: 320 mm
Rear brakes: Single 10.04 in. (255mm) fixed disc, single piston sliding caliper, OCABS
Rear brakes diameter: 220 mm
Front tyre: 120/70 R 17
Rear tyre: 180/55 R 17