43,669 bikes · 493 makes Add a bikeLog inRegister
Scooters

2012Honda Lead 110

Rate this bike
Click to vote

34 fields on record

The 2012 Honda Lead 110 is an economical commuter scooter designed for urban riders seeking reliable, fuel-efficient transportation. Known for its comfortable 2-person seating, electric start convenience, and lightweight frame, it excels as an affordable daily runabout for casual city riding. Its compact dimensions and low seat height make it accessible to a broad range of riders.

Capacity
107.0 ccm
Engine
Single, four-stroke
Gearbox
Not on record
Know it? Add it →
Dry weight
114.0 kg
Seat height
740 mm
Power
8.9 HP (6.5 kW)
⇄ Compare with another bike + Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested
Speed 15Agility 78Comfort 60Off-road 5Touring 20Road manners 65
Off-road & trail5%
Cornering45%
City riding90%
Daily riding85%
Touring20%
Two-up45%
Track5%
Best for
Built purely for short commutes and errands around town, not for speed or distance.
Built for
A practical, unpretentious little scooter that prioritizes ease of use and fuel efficiency over excitement.
Not ideal for
Not suitable for highway travel, long trips, or riders seeking any real performance.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us
At 740mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2012 Honda Lead 110, with a moderate knee angle of around 95 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 750 mm or under — Short Kings →

Find bikes that fit your height →

Full specifications

Engine
Capacity
107.0 ccm
Power
8.9 HP (6.5 kW)
Torque
9.3 Nm (0.9 kgf-m) @ 6250 RPM
Engine type
Single, four-stroke
Power/weight ratio
0.0781 HP/kg (dry)
Bore x stroke
50.0 x 55.0 mm
Compression
11.0:1
Cooling system
Liquid
Fuel system
Injection
Starting
Electric
Ignition
Fully transistorised electronic
Valves per cylinder
2
Transmission
Transmission type
Automatic
Final drive
Belt
Dimensions & weight
Wheelbase
1275 mm
Overall length
1835 mm
Overall height
1125 mm
Seat height
740 mm
Dry weight
114.0 kg
Wet weight
120.0 kg
Fuel capacity
6.50 litres
Ground clearance
105 mm
Chassis & suspension
Front suspension
33mm telescopic fork, 80mm axle travel
Rear suspension
Single-damper unit swingarm, 70mm axle travel
Front wheel travel
70 mm
Rear wheel travel
80 mm
Brakes & wheels
Front brakes
Single disc. Combined dual-piston calliper, drilled rotor and resin mould pads
Front brakes diameter
190 mm
Rear brakes
Expanding brake (drum brake)
Rear brakes diameter
130 mm
Front tyre
90/90-M12
Rear tyre
100/90-M10
Other
Color options
Red, white, silver, black

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

Rider Reviews

—
☆☆☆☆☆
Be the first to rate

Own one? Add it to My Garage and write an owner review with an Owner badge.

Common questions

What is the engine size of the Honda Lead 110?

The 2012 Honda Lead 110 has a Capacity of 107.0 ccm (6.53 cubic inches).

What engine power does the Honda Lead 110 have?

The 2012 Honda Lead 110 has a Power of 8.9 HP (6.5 kW).

What is the torque of the Honda Lead 110?

The 2012 Honda Lead 110 has a Torque of 9.3 Nm (0.9 kgf-m or 6.9 ft.lbs) @ 6250 RPM.

How much does the Honda Lead 110 weigh?

The 2012 Honda Lead 110 has a Dry weight of 114.0 kg (251.3 pounds).

Shop this bike

Affiliate links

We may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.

Similar bikes

Same category, weighted similarity

More Honda Motorcycles