Motorcycle Recall Database

BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.

BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 F650 GS AND F 800 GS MOTORCYCLES MANUFACTURED FROM SEPTEMBER 27, 2007 THROUGH MARCH 30, 2009. THE DRIVE CHAINS MAY NOT HAVE BEEN PRODUCED TO SPECIFICATION. AS A RESULT, OVER TIME THE DRIVE CHAIN COULD BREAK.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 F650 GS AND F 800 GS MOTORCYCLES MANUFACTURED FROM SEPTEMBER 27, 2007 THROUGH MARCH 30, 2009. THE DRIVE CHAINS MAY NOT HAVE BEEN PRODUCED TO SPECIFICATION. AS A RESULT, OVER TIME THE DRIVE CHAIN COULD BREAK.

BMW IS RECALLING CERTAIN 2005 THROUGH 2007 R 1200 GS ADVENTURE MOTORCYCLES MANUFACTURED FROM DECEMBER 7, 2005 THROUGH SEPTEMBER 26, 2007. THE FUEL TANK FRONT ATTACHMENT BOLTS CAN WORK LOOSE ALLOWING THE BOLTS TO COME INTO CONTACT WITH THE FORK LEG IF THE HANDLEBAR IS TURNED A SIGNIFICANT AMOUNT.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 F650 GS AND F 800 GS MOTORCYCLES MANUFACTURED FROM SEPTEMBER 27, 2007 THROUGH MARCH 30, 2009. THE DRIVE CHAINS MAY NOT HAVE BEEN PRODUCED TO SPECIFICATION. AS A RESULT, OVER TIME THE DRIVE CHAIN COULD BREAK.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 F650 GS AND F800 GS MOTORCYCLES MANUFACTURED BETWEEN JANUARY 2008 AND DECEMBER 2009. DURING ENGINE OPERATION, A VACUUM IS CREATED IN ORDER TO DRAW FRESH AIR INTO THE CANISTER. THIS AIR THEN MIXES WITH THE FUEL VAPORS CAPTURED BY THE CANISTER, AND IS SUBSEQUENTLY COMBUSTED. DUE TO THE ROUTING OF THE VENTILATION HOSE, WATER NEAR THE END OF THE HOSE COULD BE DRAWN INTO THE CHARCOAL CANISTER.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 F650 GS AND F800 GS MOTORCYCLES MANUFACTURED BETWEEN JANUARY 2008 AND DECEMBER 2009. DURING ENGINE OPERATION, A VACUUM IS CREATED IN ORDER TO DRAW FRESH AIR INTO THE CANISTER. THIS AIR THEN MIXES WITH THE FUEL VAPORS CAPTURED BY THE CANISTER, AND IS SUBSEQUENTLY COMBUSTED. DUE TO THE ROUTING OF THE VENTILATION HOSE, WATER NEAR THE END OF THE HOSE COULD BE DRAWN INTO THE CHARCOAL CANISTER.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 F650 GS AND F800 GS MOTORCYCLES MANUFACTURED BETWEEN JANUARY 2008 AND DECEMBER 2009. DURING ENGINE OPERATION, A VACUUM IS CREATED IN ORDER TO DRAW FRESH AIR INTO THE CANISTER. THIS AIR THEN MIXES WITH THE FUEL VAPORS CAPTURED BY THE CANISTER, AND IS SUBSEQUENTLY COMBUSTED. DUE TO THE ROUTING OF THE VENTILATION HOSE, WATER NEAR THE END OF THE HOSE COULD BE DRAWN INTO THE CHARCOAL CANISTER.

BMW IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 F650 GS AND F800 GS MOTORCYCLES MANUFACTURED BETWEEN JANUARY 2008 AND DECEMBER 2009. DURING ENGINE OPERATION, A VACUUM IS CREATED IN ORDER TO DRAW FRESH AIR INTO THE CANISTER. THIS AIR THEN MIXES WITH THE FUEL VAPORS CAPTURED BY THE CANISTER, AND IS SUBSEQUENTLY COMBUSTED. DUE TO THE ROUTING OF THE VENTILATION HOSE, WATER NEAR THE END OF THE HOSE COULD BE DRAWN INTO THE CHARCOAL CANISTER.

BMW IS RECALLING 754 MY 2009 F800 GS VEHICLES. THE AXLE SHAFT WALL THICKNESS MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATIONS.

BMW IS RECALLING 509 MY 2008 F650 GS AND F800 GS MOTORCYCLES. THE TIGHTENING OF THE CHAIN SPROCKET FASTENERS MAY HAVE RESULTED IN VARIOUS LEVELS OF TORQUE BEING APPLIED.

BMW IS RECALLING 1,980 MY 2007-2008 F800 S AND F800 ST MOTORCYCLES. DUE TO THE ROUTING OF THE FUEL TANK BREATHER HOSE, PRESSURE EQUALIZATION INSIDE THE FUEL TANK IS POSSIBLE ONLY TO A LIMITED EXTENT. CONSEQUENTLY, AT HIGH AMBIENT TEMPERATURES, THE FUEL TANK CAN DEFORM. IF THIS HAPPENED AT THE POINT WHERE THE FUEL TANK IS SHAPED TO PROVIDE CLEARANCE FOR THE REAR WHEEL, THEN, IN COMBINATION WITH A LARGE PAYLOAD, THE BOTTOM OF THE TANK COULD RUB AGAINST THE REAR WHEEL.

BMW IS RECALLING 1,391 MY 2007 G650X CHALLENGE, COUNTRY, AND MOTO MOTORCYCLES. THE FUEL LINES MAY HAVE BEEN DAMAGED DURING PRODUCTION, AND COULD DEVELOP A LEAK. THE LEAK COULD OCCUR EITHER THROUGH THE FABRIC INLAY AT THE END OF THE LINE, OR, THROUGH A CRACK IN THE ACTUAL LINE.

BMW IS RECALLING 744 MY 2007 G650X CHALLENGER AND COUNTRY MOTORCYCLES. THE MOTORCYCLES MAY HAVE HAD THE WRONG CIRCULAR CLIP INSTALLED ON THE LEFT HAND SIDE OF THE REAR WHEEL BEARING GUIDE. THIS CIRCLIP CAN RUB AGAINST A SPACER BUSHING, CREATING METAL SHAVINGS WHICH MAY ENTER THE WHEEL BEARING, CAUSING IT TO FAIL AND THE ANTILOCK BRAKE SYSTEM (ABS) MAY MALFUNCTION. THIS WOULD BE INDICATED BY ILLUMINATION OF THE ABS WARNING LAMP.

ON CERTAIN MOTORCYCLES, THE FUEL PUMP WIRING SET HAS NOT BEEN MANUFACTURED ACCORDING TO SPECIFICATION. THE CONTACTS IN THE PLUG FOR THE FUEL PUMP CAN BREAK.

ON CERTAIN MOTORCYCLES, A LEFT-SIDE CHAIN TENSIONER HAS BEEN INCORRECTLY INSTALLED ON THE RIGHT SIDE. AS A RESULT, A HEX NUT, WHICH IS USED TO SECURE THE CHAIN TENSIONER, IS IMPROPERLY SEATED AGAINST THE TENSIONER.

ON CERTAIN MOTORCYCLES, FREQUENT SHORT TRIPS PARTICULARLY DURING COLD TEMPERATURES, CAN CAUSE WATER TO ACCUMULATE IN THE OIL TANK, AND WHEN THE ENGINE IS RUNNING, ESCAPING WATER VAPOR CAN CONDENSE ON THE OIL TANK AIR BLEED VALVE. IN FREEZING TEMPERATURES, THIS WATER COULD FREEZE AND BLOCK THE AIR BLEED VALVE.

ON CERTAIN MOTORCYCLES, UNDER RAPID, REPEATED, AND UNUSUALLY HARSH BRAKING, LOSS OF ABS CAPABILITY COULD TEMPORARILY OCCUR.

ON CERTAIN MOTORCYCLES, IF CERTAIN PROCEDURES ARE PERFORMED THAT INVOLVES REMOVAL OF THE FRONT LEFT BRAKE CALIPER, THE ABS SENSOR CABLE CAN BE ROUTED INCORRECTLY AND WHEN THE CALIPER IS REINSTALLED, THE SENSOR CABLE CAN COME INTO CONTACT AND RUB AGAINST THE FRONT BRAKE DISC. OVERTIME, IF THE CHAFING BECOMES SEVERE, IT IS POSSIBLE TO LOSE THE ABS FUNCTION.