2025Vespa 946 Snake

Rate this bike

24 fields on record

Built around a 125cc air-cooled four-stroke single making 11.6 hp and 10.7 Nm, the 2025 Vespa 946 Snake is an Italian scooter. It has an automatic transmission and an 8-litre tank.

Capacity: 125.0 ccm
Engine: Single, four-stroke
Gearbox: Not on record
Know it? Add it →
Dry weight: Not on record
Know it? Add it →
Seat height: 805 mm
Power: 11.6 HP (8.5 kW) @ 8250 RPM

⇄ Compare with another bike ＋ Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering40%

City riding85%

Daily riding85%

Touring25%

Two-up40%

Track5%

Best for: Scooter built for its class - everyday, practical use.
Built for: A scooter from Vespa, built around a 125cc engine - a real production model, but this profile is formula-generated from its class and spec sheet rather than individually reviewed.
Not ideal for: Not for serious performance or off-road use.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 805mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2025 Vespa 946 Snake, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 125.0 ccm
Power: 11.6 HP (8.5 kW) @ 8250 RPM
Torque: 10.7 Nm (1.1 kgf-m) @ 6500 RPM
Engine type: Single, four-stroke
Bore x stroke: 58.0 x 58.6 mm
Compression: 10.5:1
Cooling system: Air
Starting: Electric
Ignition: Electronic
Lubrication system: Wet sump

Transmission

Transmission type: Automatic
Final drive: Belt
Clutch: Automatic, dry centrifuge with vibration dampets

Dimensions & weight

Wheelbase: 1405 mm
Seat height: 805 mm
Fuel capacity: 8.00 litres
Dry weight: Not on record - add it

Chassis & suspension

Frame: Metal body with welded reinforcements and aluminium elements
Front suspension: Single link arm with coil spring and dual-action hydraulic shock absorber
Rear suspension: Coil spring with adjustable preload, mono shock with progressive lever system, 5 position adjustment

Brakes & wheels