What category is the 2012 BamX BX200-DB Outback?

General information
Category	Enduro / offroad
Model	BamX BX200-DB Outback
Year	2012
Engine and Transmission Specifications
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Lubrication system	Pressure/Splash
Ignition	C.D.I.
Fuel control	OHC
Fuel system	Carburettor
Bore x stroke	62.0 x 49.5 mm (2.4 x 1.9 inches)
Compression	9.2:1
Torque	13.00 Nm (1.3 kgf-m or 9.6 ft.lbs) @ 7500
Power	14.48
Engine type	Single cylinder, four-stroke
Capacity:	196.00 ccm (11.96 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	4.10-18
Front tyre dimensions	2.75-21
Frame type	Steel
Physical measures and capacities
Oil capacity	1.30 litres (0.09 quarts)
Fuel capacity	8.60 litres (2.27 gallons)
Overall length	2,134 mm (84.0 inches)
Seat height	838 mm (33.0 inches) If adjustable, lowest setting.
Power/weight ratio	0.1158 HP/kg
Weight incl. oil, gas, etc	132.0 kg (291.0 pounds)
Dry weight	125.0 kg (275.6 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Red, blue, black
Seat	2-person seat
Starter	Electric & kick

Performance Profile & Rider Fit

16.1 hp

Peak Power

Best For

Track15%

City30%

Cornering55%

Daily Riding25%

Touring15%

Passenger10%

Rider Profile

Best For	This bike suits riders who already have some off-road or dirt bike experience, as its light weight and tall seat height reward confident, active riding.
Purpose	It's built for trail riding, enduro competition, and tackling rough terrain rather than road use or commuting.
Rider Fit	The 838mm seat height and dirt-bike ergonomics favor taller or more agile riders who can comfortably stand on the pegs and manage the bike's weight when off-balance.
Character	It's a lightweight, no-frills two-stroke enduro machine that rewards momentum, throttle control, and a willingness to get dirty over outright horsepower.
Not Ideal For	This isn't the right bike for highway touring, two-up riding, or riders wanting plush comfort and sustained high-speed cruising.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 838mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2012 BamX BX200-DB Outback, with a cramped knee angle of around 70 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →