2011Ducati Hypermotard 796

Rate this bike

38 fields on record

The 2011 Ducati Hypermotard 796 is a nimble, playful naked bike designed for riders seeking aggressive styling and fun handling over raw power. Known for its distinctive trellis frame, agile chassis, and accessible performance, it excels in urban environments and canyon carving. The compact 796cc engine and responsive brakes make it ideal for enthusiasts prioritizing maneuverability and character.

Capacity: 803.0 ccm
Engine: V-Twin, four-stroke
Gearbox: 6-speed
Dry weight: 167.0 kg
Seat height: 825 mm
Power: 75.1 HP (56.0 kW) @ 8250 RPM

⇄ Compare with another bike All model years

What’s new for the 2011 Ducati Hypermotard 796

vs the 2010

Spec	2010	2011
Power	79.9 HP (59.6 kW) @ 8000 RPM	75.1 HP (56.0 kW) @ 8250 RPM
Torque	75.4 Nm (7.7 kgf-m or 55.6 ft.lbs) @ 6250 RPM	75.5 Nm (7.7 kgf-m or 55.7 ft.lbs) @ 7700 RPM

Other years 2010 2011 2012

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail40%

Cornering90%

City riding80%

Daily riding65%

Touring38%

Two-up40%

Track55%

Best for: Designed for tossable, fun-focused street riding and twisty backroads rather than outright speed or distance covering.
Built for: Punchy, torquey V-twin character combined with sharp steering geometry gives it a playful, hooligan-like personality typical of Ducati's Hypermotard line.
Not ideal for: Not ideal for riders seeking long-distance comfort, wind protection, or a plush two-up touring experience.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 825mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2011 Ducati Hypermotard 796, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 803.0 ccm
Power: 75.1 HP (56.0 kW) @ 8250 RPM
EPA Certificate No.: BDUCC.800NHY-007
EPA CO Emissions: 3.3 CO g/km
Torque: 75.5 Nm (7.7 kgf-m) @ 7700 RPM
Engine type: V-Twin, four-stroke
Power/weight ratio: 0.4497 HP/kg (dry)
Bore x stroke: 88.0 x 66.0 mm
Compression: 11.0:1
Cooling system: Air
Fuel system: Injection
Starting: Electric
Aspiration: Naturally aspirated
Valves per cylinder: 4

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: APTC wet multiplate with hydraulic control

Dimensions & weight

Wheelbase: 1455 mm
Seat height: 825 mm
Dry weight: 167.0 kg
Fuel capacity: 12.40 litres

Chassis & suspension

Frame: Tubular steel Trellis frame
Front suspension: Marzocchi 43mm usd forks
Rear suspension: Progressive linkage with adjustable Sachs monoshock. Aluminium single-sided swingarm
Front wheel travel: 165 mm
Rear wheel travel: 141 mm
Rake (fork angle): 24.0°