What category is the 2006 Hartford VR-200H?

General information
Category	Enduro / offroad
Model	Hartford VR-200H
Year	2006
Engine and Transmission Specifications
Gearbox	5-speed
Cooling system	Oil & air
Fuel control	OHV
Bore x stroke	63.5 x 62.2 mm (2.5 x 2.4 inches)
Compression	9.0:1
Torque	14.80
Power	14.30
Stroke	4
Engine type	Single cylinder
Capacity:	197.00 ccm (12.02 cubic inches)

Physical measures and capacities
Wheelbase	1,375 mm (54.1 inches)
Overall width	850 mm (33.5 inches)
Overall length	2,110 mm (83.1 inches)
Overall height	1,230 mm (48.4 inches)
Seat height	860 mm (33.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	140.0 kg (308.6 pounds)
Hartford VR-200H dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	110/80-18
Front tyre dimensions	3.00-21
Speed and acceleration
Top speed	105.0 km/h (65.2 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel consumption pr. 10 km (6.2 miles)	3.30 litres (0.87 gallons)
Fuel capacity	12.00 litres (3.17 gallons)

Performance Profile & Rider Fit

19.2 hp

Peak Power

Best For

Track15%

City45%

Cornering50%

Daily Riding40%

Touring25%

Passenger20%

Rider Profile

Best For	This bike suits beginner to intermediate riders who want a light, unintimidating machine to learn on or explore trails with.
Purpose	It's built as a light-duty enduro/offroad trail bike for low-speed exploration rather than outright performance.
Rider Fit	The tall 860mm seat height combined with a very light 140kg dry weight makes it manageable even for shorter or less experienced riders once they adapt to the seat height.
Character	Expect a simple, torquey-at-low-revs single-cylinder character that's forgiving, easy to control, and happiest at modest speeds on loose or uneven terrain.
Not Ideal For	This is not the bike for riders wanting highway speed, long-distance touring comfort, or aggressive on-road performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with tip-toe one foot on the 2006 Hartford VR-200H, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →