Hunter Bobber 350 - 2021 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryCustom / cruiser
ModelHunter Bobber 350
Year2021

Engine and Transmission Specifications

Cooling systemLiquid
IgnitionECU
Fuel controlOverhead Cams (OHC)
Fuel systemInjection
Compression11.0:1
Power22.8 HP (16.6 kW) @ 8000 RPM
Engine typeTwin, four-stroke
Capacity:320.0 ccm (19.53 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesSingle disc. Dual Piston
Front brakesDouble disc. Dual Piston Calipers
Rear tire160/80-16
Front tire90/90-21
Rear SuspensionRigid
Front SuspensionTelescopic fork
 
 

Physical measures and capacities

Fuel capacity13.50 litres (3.57 US gallons)
Wheelbase1670 mm (65.7 inches)
Seat height680 mm (26.8 inches) If adjustable, lowest setting.
Power/weight ratio0.1373 HP/kg
Dry weight166.0 kg (366.0 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
StarterElectric
Color optionsRed, Black

Performance Profile & Rider Fit

22.8 hp
Peak Power
9.5s
0-60 mph

Best For

Track10%
City65%
Cornering35%
Daily Riding55%
Touring25%
Passenger30%

Rider Profile

Best ForThis bike suits new to intermediate riders thanks to its low seat height, modest power, and easygoing manners.
PurposeIt's built for relaxed cruising and styling around town rather than outright speed or long-distance touring.
Rider FitThe low 680mm seat height and light dry weight make it very approachable for shorter or less experienced riders.
CharacterA classic bobber-styled cruiser with a small-capacity twin engine, offering laid-back, stylish low-speed riding.
Not Ideal ForThis isn't the right bike for riders seeking highway touring comfort, off-road capability, or spirited high-speed performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 680mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2021 Hunter Bobber 350, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.