What category is the 2011 Peugeot Speedfight 50?

General information
Year	2011
Engine and Transmission Specifications
Transmission type,final drive	Belt
Cooling system	Air
Ignition	C.D.I
Fuel system	Carburettor
Engine type	Single cylinder, two-stroke
Capacity:	49.10 ccm (3.00 cubic inches)


Category	Scooter
Model	Peugeot Speedfight 50
Brakes, suspension, Frame and wheels
Rear brakes diameter	110 mm (4.3 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	180 mm (7.1 inches)
Front brakes	Single disc
Rear tyre dimensions	130/70-12
Front tyre dimensions	120/70-12
Physical measures and capacities
Fuel capacity	7.20 litres (1.90 gallons)
Overall width	700 mm (27.6 inches)
Overall length	1,730 mm (68.1 inches)
Overall height	1,150 mm (45.3 inches)
Seat height	810 mm (31.9 inches) If adjustable, lowest setting.
Dry weight	90.0 kg (198.4 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric & kick

Performance Profile & Rider Fit

Best For

Track5%

City88%

Cornering40%

Daily Riding75%

Touring15%

Passenger30%

Rider Profile

Best For	Note: the specifications provided are actually for a PGO GTA 50, not the named Peugeot Speedfight 50, so this profile is based on that data and general 50cc scooter knowledge; suitable for beginners and learner-permit riders.
Purpose	Built purely as a lightweight, low-displacement urban commuter for short hops through town rather than any performance or distance riding.
Rider Fit	Its low weight and compact dimensions make it very easy to handle for riders of almost any size or strength, including smaller or less experienced riders.
Character	A nimble, no-frills city scooter that prioritizes light weight and manageability over outright speed or long-distance comfort.
Not Ideal For	Not a good fit for highway commuting, touring, carrying a passenger comfortably, or anyone wanting real acceleration and top speed.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 810mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2011 Peugeot Speedfight 50, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →