Royal Alloy GT 125I - 2021 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryScooter
ModelRoyal Alloy GT 125i
Year2021
 
 

Engine and Transmission Specifications

Emission detailsEuro 4
ClutchAutomatic CVT
Transmission typeBelt   (final drive)
GearboxAutomatic
Cooling systemAir
Fuel systemInjection
Compression10.5:1
Torque9.2 Nm (0.9 kgf-m or 6.8 ft.lbs) @ 7000 RPM
Power9.5 HP (6.9 kW) @ 7500 RPM
Engine typeSingle cylinder, four-stroke
Capacity:125.0 ccm (7.63 cubic inches)

Brakes, suspension, Frame and wheels

WheelsCast
Rear brakesSingle disc
Diameter220 mm (8.7 inches)
Front brakesSingle disc
Rear tire120/70-12
Front tire110/70-12
Rear SuspensionSingle Shock
Front SuspensionSpring Shock
Frame typeSteel Cradle
 
 

Physical measures and capacities

Fuel capacity11.00 litres (2.91 US gallons)
Wheelbase1390 mm (54.7 inches)
Overall width620 mm (24.4 inches)
Overall length1870 mm (73.6 inches)
Overall height1115 mm (43.9 inches)
Seat height770 mm (30.3 inches) If adjustable, lowest setting.
Power/weight ratio0.0732 HP/kg
Dry weight130.0 kg (286.6 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
CommentsUK brand.
Factory warranty24 months, unlimited mile, roadside assistance
Electrical12 Volt 14Ah battery
StarterElectric
Color optionsBlack, red, bronze, ivory, blue, white

Performance Profile & Rider Fit

9.5 hp
Peak Power

Best For

Track5%
City88%
Cornering40%
Daily Riding80%
Touring30%
Passenger35%

Rider Profile

Best ForIdeal for beginner riders or anyone holding a moped/light-license category, requiring minimal prior riding experience.
PurposeBuilt for short urban commutes and light errands rather than performance riding or long-distance travel.
Rider FitLow seat height and light dry weight make it easy to manage for riders of smaller stature or lower confidence with handling weight.
CharacterA classically styled, easygoing retro scooter that prioritizes charm, comfort, and everyday practicality over outright performance.
Not Ideal ForNot suitable for highway touring, high-speed travel, or riders seeking off-road capability or a passenger-focused setup.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 770mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2021 Royal Alloy GT 125I, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.