What category is the 2017 SWM RS 300 R?

General information
Category	Enduro / offroad
Model	SWM RS 300 R
Year	2017

Engine and Transmission Specifications
Clutch	Wet, multiplate type; mecanical control
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Dry sump with two oil pump rotor and cartridge filter
Ignition	Electronic
Fuel system	Injection. MIKUNI D42
Bore x Stroke	83.1 x 55.4 mm (3.3 x 2.2 inches)
Engine type	Single cylinder, four-stroke
Capacity:	297.44 ccm (18.15 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes diameter	240 mm (9.4 inches)
Rear brakes	Single disc
Front brakes diameter	260 mm (10.2 inches)
Front brakes	Single disc
Rear tyre	120/80-18
Front tyre	90/90-21
Rear Suspension	Kayba ´Soft Damp´monoshock absorber with adjustment
Front Suspension	Kayba Upside-Down fork
Frame type	Single beam double cradle main frame
Physical measures and capacities
Fuel capacity	7.19 litres (1.90 gallons)
Wheelbase	1,495 mm (58.9 inches)
Seat height	963 mm (37.9 inches) If adjustable, lowest setting.
Dry weight	107.0 kg (235.9 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	SWM is short for Speedy Working Motors in Italy. Cooperated with Chinese Shineray.
Starter	Electric
Color options	Red/white/yellow/black

Performance Profile & Rider Fit

Best For

Track20%

City35%

Cornering55%

Daily Riding30%

Touring25%

Passenger15%

Rider Profile

Best For	This bike suits riders who already have some off-road or dirt-bike experience, given its tall seat height and enduro-focused ergonomics.
Purpose	It's built primarily for trail riding, technical off-road terrain, and enduro-style adventures rather than pavement performance.
Rider Fit	The tall 963mm seat height and lightweight but top-heavy stance mean shorter or less confident riders may find it demanding at low speeds and standstill.
Character	It has the light, nimble, and responsive character typical of a small-displacement single-cylinder enduro machine, prioritizing agility over outright power.
Not Ideal For	This is not the right choice for riders wanting highway comfort, long-distance touring range, or a passenger-friendly setup.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 963mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2017 SWM RS 300 R, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →