Yamaha DT 175 - 2005 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelYamaha DT 175
Year2005

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox6-speed
Cooling systemAir
Bore x stroke66.0 x 50.0 mm (2.6 x 2.0 inches)
Compression6.7:1
Torque18.63
Power17.50
Stroke2
Engine typeSingle cylinder
Capacity:171.00 ccm (10.43 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,340 mm (52.8 inches)
Ground clearance260 mm (10.2 inches)
Overall width865 mm (34.1 inches)
Overall length2,110 mm (83.1 inches)
Overall height1,165 mm (45.9 inches)
Seat height830 mm (32.7 inches) If adjustable, lowest setting.
Dry weight98.0 kg (216.1 pounds)

Yamaha DT 175 dimensions and frame

Rear brakesExpanding brake (drum brake)
Front brakesSingle disc
Rear suspensionMonocross
Front suspensionTelescopic fork

Speed and acceleration

Power/weight ratio0.1786 HP/kg

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsWhite/Blue, Black/Purple, White/Blue/Black
Fuel capacity9.50 litres (2.51 gallons)

Performance Profile & Rider Fit

Best For

Track15%
City45%
Cornering60%
Daily Riding40%
Touring25%
Passenger20%

Rider Profile

Best ForSuits riders from novice to intermediate who want a light, forgiving two-stroke enduro to build off-road skills on.
PurposeBuilt primarily for trail riding, tight technical terrain, and light dual-sport duty rather than outright speed.
Rider FitIts low dry weight and tall but slim seat height make it manageable for smaller or lighter riders, though the seat height demands reasonable inseam length.
CharacterA nimble, buzzy two-stroke single that rewards momentum and skillful throttle control over raw power.
Not Ideal ForNot a good fit for riders wanting sustained highway speeds, long-distance comfort, or a passenger-friendly ride.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 830mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2005 Yamaha DT 175, with a cramped knee angle of around 70 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.