2010Benelli Tre 1130K Amazonas

42 fields on record

The 2010 Benelli Tre 1130K Amazonas is a middleweight naked bike powered by a distinctive 1131cc three-cylinder engine delivering 123 horsepower and strong mid-range torque. Best suited for riders seeking character and Italian flair, it excels as a spirited street machine with excellent handling and a unique triple-cylinder personality that sets it apart from conventional competitors.

Capacity: 1131.0 ccm
Engine: In-line three-cylinder, four-stroke
Gearbox: 6-speed
Dry weight: 215.0 kg
Seat height: 840 mm
Power: 123.4 HP (90.8 kW) @ 9000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

What’s new for the 2010 Benelli Tre 1130K Amazonas

vs the 2009

Spec	2009	2010
Front suspension	Upside down fork, adjustable	Ø48 mm upside-down fork, with hydraulic extension / compression and spring preload adjustments
Rear suspension	ASD steel tube trellis swingarm, preload adjuster	Steel trestle swingarm, progressive rear dumper with hydraulic extension and spring preload adjustments
Front brakes	Single disc	Double disc

Other years 2007 2008 2009 2010

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail55%

Cornering60%

City riding55%

Daily riding65%

Touring70%

Two-up60%

Track40%

Best for: It's a quirky, big-bore adventure-naked hybrid built for long-distance road touring with an off-road-inspired stance rather than serious dirt capability.
Built for: The inline-triple engine and 19-inch front wheel give it a distinctive character, blending strong midrange torque with a rugged, expedition-bike look.
Not ideal for: It's not a good fit for riders seeking nimble city commuting, serious off-road trail riding, or a lightweight, flickable machine for tight cornering.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 840mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2010 Benelli Tre 1130K Amazonas, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1131.0 ccm
Power: 123.4 HP (90.8 kW) @ 9000 RPM
Torque: 112.0 Nm (11.4 kgf-m) @ 5000 RPM
Engine type: In-line three-cylinder, four-stroke
Power/weight ratio: 0.5740 HP/kg (dry)
Bore x stroke: 88.0 x 62.0 mm
Compression: 11.6:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: Digital - inductive type via electronic engine management
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet

Dimensions & weight

Wheelbase: 1530 mm
Overall length: 2200 mm
Overall width: 865 mm
Overall height: 1370 mm
Seat height: 840 mm
Dry weight: 215.0 kg
Wet weight: 240.0 kg
Fuel capacity: 22.00 litres
Ground clearance: 170 mm
Reserve fuel capacity: 4.00 litres

Chassis & suspension

Frame: Decomposable, front steel trestle, rear aluminum alloy casting
Front suspension: Ø48 mm upside-down fork, with hydraulic extension / compression and spring preload adjustments
Rear suspension: Steel trestle swingarm, progressive rear dumper with hydraulic extension and spring preload adjustments
Front wheel travel: 150 mm
Rear wheel travel: 144 mm
Rake (fork angle): 25.0°
Trail: 127 mm