Adventure Motorcycles

2017Benelli TRE 1130 K

43 fields on record

The 2017 Benelli TRE 1130 K is a triple-cylinder adventure tourer for riders who want character, comfort and range. Its 1131cc liquid-cooled inline-three makes 125 hp and 112 Nm, with an 850 mm seat.

Capacity: 1131.0 ccm
Engine: In-line three-cylinder, four-stroke
Gearbox: 6-speed
Dry weight: 215.0 kg
Seat height: 850 mm
Power: 125.0 HP (91.2 kW) @ 9000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

What’s new for the 2017 Benelli TRE 1130 K

vs the 2016

Spec	2016	2017
Fuel capacity	22.00 litres (5.81 US gallons)	21.50 litres (5.68 US gallons)

Other years 2007 2008 2009 2010 2016 2017

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail3%

Cornering80%

City riding58%

Daily riding62%

Touring55%

Two-up50%

Track60%

Best for: A muscular Italian naked built for spirited road riding, fast backroad blasts and confident cornering, with enough fuel range for longer days.
Built for: Charismatic, torque-rich inline-triple with distinctive Benelli exclusivity - punchy, characterful and eager, blending muscle with agility.
Not ideal for: Not for novices, off-road use, or riders wanting a light commuter or fully faired long-distance tourer.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 850mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2017 Benelli TRE 1130 K, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 1131.0 ccm
Power: 125.0 HP (91.2 kW) @ 9000 RPM
CO2 Emissions: 3 CO2 g/km
Torque: 112.0 Nm (11.4 kgf-m) @ 5000 RPM
Engine type: In-line three-cylinder, four-stroke
Power/weight ratio: 0.5814 HP/kg (dry)
Bore x stroke: 88.0 x 62.0 mm
Compression: 11.6:1
Cooling system: Liquid
Fuel system: Injection
Starting: Electric
Ignition: Walbro ECUA-1
Valves per cylinder: 4
Lubrication system: Wet sump

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet multiplate

Dimensions & weight

Wheelbase: 1515 mm
Overall length: 2183 mm
Overall width: 850 mm
Overall height: 1050 mm
Seat height: 850 mm
Dry weight: 215.0 kg
Wet weight: 240.0 kg
Fuel capacity: 21.50 litres
Ground clearance: 140 mm
Reserve fuel capacity: 4.00 litres

Chassis & suspension

Frame: Decomposable, front steel trestle, rear aluminum alloy casting
Front suspension: Ø50 mm upside-down fork, with hydraulic rebound / compression and spring preload adjustments
Rear suspension: Steel trestle swingarm, progressive rear dumper with hydraulic extension and spring preload adjustments
Front wheel travel: 150 mm
Rear wheel travel: 144 mm
Rake (fork angle): 25.0°
Trail: 102 mm

Brakes & wheels

Front brakes: Double disc. 4-piston caliper
Front brakes diameter: 320 mm
Rear brakes: Single disc. 2-piston caliper
Rear brakes diameter: 240 mm
Front tyre: 120/70-ZR17
Rear tyre: 180/55-ZR17

Other

Color options: Anthrasite grey

Specs last verified against published sources: September 2026.

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2007	2008	2010	2016	2017
Capacity	1130 cc	1131 cc	1131 cc	1131 cc	1131 cc
Dry weight	205 kg	210 kg	215 kg	215 kg	215 kg
Seat height	838 mm	838 mm	840 mm	850 mm	850 mm
Fuel capacity	22 L	22 L	22 L	22 L	21.5 L