Sportbikes
2018Kawasaki Ninja 650 ABS KRT Edition
43 fields on record
The 2018 Kawasaki Ninja 650 ABS KRT Edition is an accessible middleweight sportbike designed for riders transitioning from smaller bikes or returning to motorcycling. It delivers approachable performance with its parallel-twin engine, lightweight steel trellis frame, and standard ABS braking, making it equally suited for commuting and weekend riding. The distinctive Lime Green and Ebony livery emphasizes its sporty character while maintaining the ergonomic comfort needed for all-day riding.
- Capacity
- 650.0 ccm
- Engine
- Parallel Twin, four-stroke
- Gearbox
- 6-speed
- Wet weight
- 193.1 kg
- Seat height
- 790 mm
- Power
- 68.0 HP (49.6 kW) @ 8000 RPM
How it rides
Editorial estimate from the spec sheet - not lab tested- Best for
- Built as a versatile sport-standard for mixed commuting, twisty back roads, and occasional weekend rides rather than outright track performance.
- Built for
- A friendly, mid-weight parallel-twin sportbike that favors smooth, accessible power delivery and predictable handling over outright aggression.
- Not ideal for
- Not the right choice for riders chasing top-tier sportbike lap times or anyone planning serious off-road or long-haul touring use.
Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.
Will it fit you?
Worked out in your browser - nothing is sent to usEngine
- Capacity
- 650.0 ccm
- Power
- 68.0 HP (49.6 kW) @ 8000 RPM
- Torque
- 65.7 Nm (6.7 kgf-m) @ 6500 RPM
- Engine type
- Parallel Twin, four-stroke
- Power/weight ratio
- 0.3521 HP/kg (wet)
- Bore x stroke
- 83.0 x 60.0 mm
- Compression
- 10.8:1
- Cooling system
- Liquid
- Fuel system
- Injection
- Starting
- Electric
- Ignition
- TCBI with digital advance
- Valves per cylinder
- 4
- Lubrication system
- Forced lubrication, semi-dry sump
Transmission
- Gearbox
- 6-speed
- Transmission type
- Manual
- Final drive
- Chain
- Clutch
- Wet multi-disc, manual
Dimensions & weight
- Wheelbase
- 1410 mm
- Overall length
- 2055 mm
- Overall width
- 740 mm
- Overall height
- 1135 mm
- Seat height
- 790 mm
- Wet weight
- 193.1 kg
- Fuel capacity
- 15.00 litres
- Ground clearance
- 130 mm
- Dry weight
- Not on record - add it
Chassis & suspension
- Frame
- Trellis, high-tensile steel
- Front suspension
- 41mm hydraulic telescopic fork
- Rear suspension
- Horizontal Back-link with adjustable preload
- Front wheel travel
- 124 mm
- Rear wheel travel
- 130 mm
- Rake (fork angle)
- 24.0°
- Trail
- 99 mm
Brakes & wheels
- Front brakes
- Double disc. ABS. Petal discs and two-piston calipers.
- Front brakes diameter
- 300 mm
- Rear brakes
- Single disc. ABS. Petal disc and single piston caliper.
- Rear brakes diameter
- 220 mm
- ABS
- Yes
- Front tyre
- 120/70-ZR17
- Rear tyre
- 160/60-ZR17
Other
- Color options
- Lime Green/Ebony
- Warranty
- 12
- Comments
- Small windshield
Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.
Safety Recalls
⚠ 2 recalls may applyPOWER TRAIN:MANUAL TRANSMISSIONNov 2020 · 20V676000
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.
Risk: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.
Remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.
STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STANDAug 2018 · 18V580000
Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2018 Kawasaki Ninja H2 SX SE (ZXT02BJ) motorcycles. The pin for the center stand spring may have been improperly welded, and, as a result, the pin may shift or fall off resulting in the spring detaching and the center stand dropping to the ground unexpectedly and dragging while riding.
Risk: The dragging center stand can cause a loss of control, increasing the risk of a crash.
Remedy: Kawasaki will notify owners, and dealers will replace the left center stand bracket, free of charge. Owners may contact Kawasaki customer service at 1-866-802-9381. Kawasaki's number for this recall is MC18-05.
These recalls cover some 2018 bikes of this model. Whether one applies to a specific bike, and whether the repair has already been done, depends on its VIN — check your VIN with NHTSA or ask a dealer.
Source: NHTSA. View all Kawasaki recalls →
Rider Reviews
Common questions
What is the engine size of the Kawasaki Ninja 650 ABS KRT Edition?
The 2018 Kawasaki Ninja 650 ABS KRT Edition has a Capacity of 650.0 ccm (39.67 cubic inches).
What engine power does the Kawasaki Ninja 650 ABS KRT Edition have?
The 2018 Kawasaki Ninja 650 ABS KRT Edition has a Power of 68.0 HP (49.6 kW) @ 8000 RPM.
How many gears does the Kawasaki Ninja 650 ABS KRT Edition have?
The 2018 Kawasaki Ninja 650 ABS KRT Edition has a Gearbox of 6-speed.
What is the torque of the Kawasaki Ninja 650 ABS KRT Edition?
The 2018 Kawasaki Ninja 650 ABS KRT Edition has a Torque of 65.7 Nm (6.7 kgf-m or 48.5 ft.lbs) @ 6500 RPM.
How much does the Kawasaki Ninja 650 ABS KRT Edition weigh?
The 2018 Kawasaki Ninja 650 ABS KRT Edition has a Wet weight of 193.1 kg (425.7 pounds).
Shop this bike
Affiliate linksWe may earn a commission from qualifying eBay or Amazon purchases made through these links. As an Amazon Associate I earn from qualifying purchases.
The 2018 Kawasaki Ninja 650 ABS KRT Edition is a visually stunning and technologically advanced motorcycle that is sure to turn heads on the road. With its striking green and black color scheme, this bike exudes style and confidence. The ABS feature provides added safety and control, making it a great choice for both experienced riders and newbies alike. The 649cc parallel-twin engine delivers smooth and responsive power, while the lightweight chassis and comfortable seating position make for an enjoyable riding experience. Overall, the Ninja 650 ABS KRT Edition is a solid choice for anyone looking for a versatile and stylish sport bike.
In conclusion, the 2018 Kawasaki Ninja 650 ABS KRT Edition is an impressive motorcycle that offers a perfect blend of performance, style, and safety. Whether you're a seasoned rider or just starting out, this bike has something to offer everyone. The addition of ABS only adds to the appeal, making it a reliable and confidence-inspiring choice for riders of all levels. If you're in the market for a visually striking and technologically advanced sport bike, the Ninja 650 ABS KRT Edition is definitely worth considering.
Please log in or register if you'd like to leave a comment.
Own one? Add it to My Garage and write an owner review with an Owner badge.