What category is the 2002 Beta Alp 125?

General information
Category	Enduro / offroad
Model	Beta Alp 125
Year	2002

Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	6-speed
Valves per cylinder	2
Fuel system	Carburettor
Bore x stroke	57.0 x 48.8 mm (2.2 x 1.9 inches)
Power	11.00
Stroke	4
Engine type	Single cylinder
Capacity:	124.00 ccm (7.57 cubic inches)

Physical measures and capacities
Wheelbase	1,350 mm (53.1 inches)
Seat height	810 mm (31.9 inches) If adjustable, lowest setting.
Dry weight	103.0 kg (227.1 pounds)
Beta Alp 125 dimensions and frame
Rear brakes diameter	200 mm (7.9 inches)
Rear brakes	Single disc
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc
Rear suspension travel	175 mm (6.9 inches)
Front suspension travel	170 mm (6.7 inches)
Speed and acceleration
Power/weight ratio	0.1068 HP/kg
Top speed	90.0 km/h (55.9 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity	7.00 litres (1.85 gallons)

Performance Profile & Rider Fit

Best For

Track5%

City25%

Cornering40%

Daily Riding15%

Touring10%

Passenger5%

Rider Profile

Best For	Best suited to riders with some off-road or trials background, as the bike's light weight and tall stance reward balance and technical skill more than raw experience.
Purpose	Built specifically for technical trials riding and obstacle navigation rather than speed, distance, or road use.
Rider Fit	Its featherweight 101 kg dry mass and slim profile make it very easy to muscle around and hold up, though the tall 850 mm seat height demands decent leg reach.
Character	A pure, minimalist trials tool that thrives on razor-sharp low-speed agility, tractable low-end power delivery, and total rider control over the bike's balance.
Not Ideal For	Not for riders wanting highway speed, passenger carrying, long-distance comfort, or any kind of touring capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 810mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2002 Beta Alp 125, with a cramped knee angle of around 70 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →