What category is the 2000 Kawasaki EN 500?

General information
Category	Custom / cruiser
Model	Kawasaki EN 500
Year	2000

Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Starter	Electric
Valves per cylinder	4
Bore x stroke	74.0 x 58.0 mm (2.9 x 2.3 inches)
Compression	10.2:1
Torque	39.00
Power	46.00
Stroke	4
Engine type	Twin
Capacity:	499.00 ccm (30.45 cubic inches)
Physical measures and capacities
Wheelbase	1,595 mm (62.8 inches)
Seat height	715 mm (28.1 inches) If adjustable, lowest setting.
Front percentage of weight	47.0
Weight incl. oil, gas, etc	214.0 kg (471.8 pounds)
Kawasaki EN 500 dimensions and frame
Rear brakes diameter	180 mm (7.1 inches)
Rear brakes	Expanding brake
Front brakes diameter	300 mm (11.8 inches)
Front brakes	Single disc
Rear tyre dimensions	140/90-15
Front tyre dimensions	100/90-19
Rear suspension travel	70 mm (2.8 inches)
Front suspension travel	150 mm (5.9 inches)
Speed and acceleration
60-140 km/h (37-87 mph), highest gear	18.000 seconds
0-100 km/h (0-62 mph)	6.700 seconds
Top speed	159.0 km/h (98.8 mph)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel consumption pr. 10 km (6.2 miles)	0.49 litres (0.13 gallons)
Fuel capacity	15.00 litres (3.96 gallons)

Performance Profile & Rider Fit

46 hp

Peak Power

7.5s

0-60 mph

Best For

Track10%

City65%

Cornering45%

Daily Riding65%

Touring45%

Passenger45%

Rider Profile

Best For	Well suited to beginner and lower-intermediate riders thanks to its modest power output and manageable weight.
Purpose	Designed as an easygoing, classic-styled cruiser for relaxed street riding rather than performance.
Rider Fit	A low, accessible seat height and light overall mass make it easy for shorter or less experienced riders to manage.
Character	A mellow, torque-friendly parallel-twin cruiser that favors laid-back cruising over aggressive riding.
Not Ideal For	Not the right choice for riders seeking high-speed thrills, sport-bike agility, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 715mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2000 Kawasaki EN 500, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →