2010Honda CBF125

Rate this bike

38 fields on record

The 2010 Honda CBF125 is an entry-level commuter motorcycle designed for new riders and urban transport duties. Its lightweight 124cc single-cylinder engine delivers modest power with excellent fuel efficiency, while the comfortable ergonomics and manageable handling make it ideal for learning fundamental riding skills. The CBF125 is best known for its reliability, affordability, and practical allround capabilities on city streets and shorter journeys.

Capacity: 124.7 ccm
Engine: Single, four-stroke
Gearbox: 5-speed
Dry weight: 128.0 kg
Seat height: 792 mm
Power: 11.1 HP (8.2 kW) @ 8000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

Other years 2010 2011 2012 2013 2014 2015 2016 2017

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail10%

Cornering40%

City riding82%

Daily riding78%

Touring20%

Two-up25%

Track10%

Best for: It's designed as an economical commuter and learner bike for short trips and everyday urban transport rather than performance riding.
Built for: It has a friendly, low-stress character defined by light handling, modest power, and fuss-free reliability rather than excitement.
Not ideal for: It's not suited to riders wanting highway speed, long-distance touring comfort, or any serious off-road capability.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 792mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Honda CBF125, with a moderate knee angle of around 115 degrees and a slightly forward riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 751-820 mm — Middle Ground →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 124.7 ccm
Power: 11.1 HP (8.2 kW) @ 8000 RPM
Torque: 11.2 Nm (1.1 kgf-m) @ 6250 RPM
Engine type: Single, four-stroke
Power/weight ratio: 0.0867 HP/kg (dry)
Bore x stroke: 52.4 x 57.8 mm
Compression: 9.2:1
Cooling system: Air
Fuel system: Injection
Starting: Electric
Ignition: Computer controlled fully transistorised with electronic advance
Valves per cylinder: 2

Transmission

Gearbox: 5-speed
Transmission type: Manual
Final drive: Chain

Dimensions & weight

Wheelbase: 1270 mm
Overall length: 1955 mm
Overall width: 760 mm
Overall height: 1110 mm
Seat height: 792 mm
Dry weight: 128.0 kg
Fuel capacity: 13.00 litres
Ground clearance: 173 mm

Chassis & suspension

Frame: Steel
Front suspension: 30mm telescopic fork, 115mm axle travel
Rear suspension: Conventional twin shock, double tube damper with 3-step adjustable spring preload, 87mm axle travel
Front wheel travel: 115 mm
Rear wheel travel: 87 mm
Rake (fork angle): 26.0°
Trail: 97 mm

Brakes & wheels

Front brakes: Single disc
Front brakes diameter: 240 mm
Rear brakes: Expanding brake (drum brake)
Rear brakes diameter: 130 mm
Front tyre: 80/0-M17
Rear tyre: 100/90-M17

Other

Color options: Red, black, white

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.

What changed, year to year

Differences highlighted

Specification	2010	2012	2014	2015	2017
Capacity	125 cc	125 cc	125 cc	125 cc	125 cc
Dry weight	128 kg	128 kg	128 kg	128 kg	128 kg
Seat height	792 mm	792 mm	792 mm	792 mm	792 mm
Fuel capacity	13 L	13 L	13 L	13 L	13 L