2026Triumph Street Triple 765 MOTO2

Rate this bike

30 fields on record

The 2026 Triumph Street Triple 765 Moto2 is a middleweight naked bike designed for riders seeking sharp handling and accessible performance. Its 765cc triple engine delivers 130 PS with a characterful powerband, while premium Öhlins suspension and lightweight aluminum frame provide precise control. Best known for combining naked bike practicality with track-focused agility, it suits enthusiasts wanting engaging everyday thrills.

Capacity: 765.0 ccm
Engine: In-line three-cylinder
Gearbox: 6-speed
Wet weight: 188.0 kg
Seat height: 839 mm
Power: 128.0 HP (95.6 kW) @ 12000 RPM

⇄ Compare with another bike ＋ Add to garage All model years

How it rides

Editorial estimate from the spec sheet - not lab tested

Off-road & trail5%

Cornering97%

City riding60%

Daily riding50%

Touring28%

Two-up20%

Track92%

Best for: Built as a MOTO2-inspired special edition, it exists primarily for spirited cornering, trackday lapping, and showcasing top-tier suspension and brake componentry rather than practical commuting.
Built for: It has the personality of a razor-sharp, revvy triple that rewards precise inputs with thrilling agility and feedback rather than relaxed cruising manners.
Not ideal for: This is not the right bike for riders seeking long-distance comfort, passenger-friendly touring, or any kind of off-road capability.

Scores are derived from the spec sheet using the same model across every bike, so they compare like for like.

Will it fit you?

Worked out in your browser - nothing is sent to us

Your height

Inseam (optional)

Units

At 839mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2026 Triumph Street Triple 765 MOTO2, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Assumes about 30mm of suspension sag once seated. This is an approximation from category-typical geometry, not a measurement of this bike or of you - sit on one before you buy.

More bikes at 821-900 mm — Long Legs →

Find bikes that fit your height →

Full specifications

Engine

Capacity: 765.0 ccm
Power: 128.0 HP (95.6 kW) @ 12000 RPM
Torque: 80.0 Nm (8.2 kgf-m) @ 9500 RPM
Engine type: In-line three-cylinder
Power/weight ratio: 0.6809 HP/kg (wet)
Compression: 13.3:1
Fuel system: Injection

Transmission

Gearbox: 6-speed
Transmission type: Manual
Final drive: Chain
Clutch: Wet, multi-plate, slip & assist

Dimensions & weight

Wheelbase: 1397 mm
Overall length: 2051 mm
Overall width: 765 mm
Overall height: 1051 mm
Seat height: 839 mm
Wet weight: 188.0 kg
Fuel capacity: 15.00 litres
Dry weight: Not on record - add it

Chassis & suspension

Frame: Aluminum beam twin spar frame with 2 piece high pressure die cast rear subframe
Front suspension: Öhlins NIX30, adjustable compression and rebound damping, and preload adjustment. 4.5 in (115 mm) wheel travel.
Rear suspension: Öhlins STX40 piggyback reservoir monoshock, adjustable compression and rebound damping, and preload adjustment. 5.16 in (131.2 mm)wheel travel.
Rake (fork angle): 23.0°
Trail: 95 mm
Rake: 23.0deg (same in imperial)

Brakes & wheels

Front brakes: Twin 12.2 in (310 mm)floating discs, Brembo Stylema 4-piston radial monobloc calipers, OC-ABS, Brembo MCS radial master cylinder
Rear brakes: Single 8.66 in (220 mm)disc, Brembo single piston caliper, OC-ABS
ABS: Yes
Front tyre: 120/70 ZR 17
Rear tyre: 180/55 ZR 17

Compiled from manufacturer documentation and user contributions, corrected on an ongoing basis. Spotted something wrong? Tell us.