What category is the 2016 Aprilia SR 50 Factory?

General information
Year	2016
Engine and Transmission Specifications
Driveline	V belt. Continuous automatic variator .
Clutch	Automatic centrifugal dry clutch
Transmission type,final drive	Belt
Gearbox	Automatic
Cooling system	Liquid
Lubrication system	Wet sump forced lubrication system with mechanical pump
Ignition	CDI
Fuel system	Injection. EFI low flow injector. Direct injection system External opening, SMD 8 micron medium spray.
Bore x stroke	40.0 x 39.3 mm (1.6 x 1.5 inches)
Compression	11.5:1
Torque	4.70 Nm (0.5 kgf-m or 3.5 ft.lbs)
Power	5.36
Engine details	Reed valve
Engine type	Single cylinder, two-stroke
Capacity:	49.00 ccm (2.99 cubic inches)


Category	Scooter
Model	Aprilia SR 50 Factory
Brakes, suspension, Frame and wheels
Wheels	Five spoke light alloy wheels
Rear brakes diameter	190 mm (7.5 inches)
Rear brakes	Single disc
Front brakes diameter	190 mm (7.5 inches)
Front brakes	Single disc
Rear tyre dimensions	130/60-13
Front tyre dimensions	130/60-13
Rear suspension travel	70 mm (2.8 inches)
Rear suspension	Engine unit acting as swingarm
Front suspension travel	90 mm (3.5 inches)
Front suspension	Hydraulic fork,
Frame type	Split single cradle frame in high tensile strength steel tube
Physical measures and capacities
Reserve fuel capacity	1.20 litres (0.32 gallons)
Fuel capacity	7.00 litres (1.85 gallons)
Wheelbase	1,290 mm (50.8 inches)
Overall length	1,860 mm (73.2 inches)
Overall height	1,120 mm (44.1 inches)
Seat height	820 mm (32.3 inches) If adjustable, lowest setting.
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Red, black, orange
Factory warranty	2-year unlimited-mileage warranty.
Starter	Electric

Performance Profile & Rider Fit

4 hp

Peak Power

Best For

Track5%

City88%

Cornering45%

Daily Riding65%

Touring8%

Passenger20%

Rider Profile

Best For	Suited to beginners, teens, or anyone with a basic moped-class license looking for simple, low-stakes transportation.
Purpose	Built purely for short urban hops and errands, not for any kind of serious distance or speed riding.
Rider Fit	Very light and low, making it easy to handle for smaller or less experienced riders, including many teenagers.
Character	A sporty-styled 50cc city scooter that offers peppy looks and nimble handling without any real performance to back it up.
Not Ideal For	Not for anyone needing highway speeds, long trips, passenger comfort, or off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 820mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with balls of both feet on the 2016 Aprilia SR 50 Factory, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →