Honda Fury - 2025 Specifications and Reviews

The 2025 Honda Fury is a cruiser designed for riders seeking a commanding, low-slung riding position with aggressive styling. Known for its radical, chopper-inspired design and manageable 306 kg weight, it delivers responsive handling through adjustable suspension and ABS-equipped braking. Best suited for urban commuting and weekend cruising, the Fury combines eye-catching aesthetics with practical performance.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Color OptionsAdventure Green
PriceUS$ 11499. MSRP depends on country, taxes, accessories, etc.
CategoryCustom / cruiser
Year2025

Engine and Transmission Specifications

StartingElectric
Emission DetailsMeets current EPA standards. California version meets current CARB standards.
Emission121.3 CO2 g/km. (CO2 - Carbon dioxide emission)
Fuel Consumption5.23 litres/100 km (19.1 km/l or 44.98 mpg)
Final DriveShaft drive (cardan) (final drive)
Gearbox5-speed
Cooling SystemLiquid
IgnitionDigital with three-dimensional mapping, two spark plugs per cylinder
Fuel ControlSingle Overhead Cams (SOHC)
InductionInjection. PGM-FI, 38mm throttle body
Valves Per Cylinder3
Bore x Stroke89.5 x 104.3 mm (3.5 x 4.1 inches)
Compression Ratio9.2:1
Engine Details52 degrees V-twin
Engine TypeV2, four-stroke
Capacity:1312.0 ccm (80.06 cubic inches)
 
 

Physical measures and capacities

Fuel Capacity12.90 litres (3.41 US gallons)
Wheelbase1803 mm (71.0 inches)
Ground Clearance125 mm (4.9 inches)
Overall Width897 mm (35.3 inches)
Overall Length2553 mm (100.5 inches)
Overall Height1151 mm (45.3 inches)
Seat Height678 mm (26.7 inches) If adjustable, lowest setting.
Wet Weight306.2 kg (675.0 pounds)

Honda Fury dimensions and frame

WheelsDunlop
Rear BrakesSingle disc. Single-piston caliper. ABS.
Brake Disc Diameter296 mm (11.7 inches)
Front BrakesSingle disc. Two-piston calipers. ABS.
Rear Tyre200/50-18
Front Tyre90/90-21
Rear Wheel Travel89 mm (3.5 inches)
Rear SuspensionSingle shock with adjustable rebound-damping and five-position spring-preload adjustability
Front Wheel Travel130 mm (5.1 inches)
Front Suspension45mm telescopic fork
Trail92 mm (3.6 inches)
FrameHigh-tensile steel

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Update specsReport missing specs or required updates.
CommentsModel ID: VT1300CX.
WarrantyOne year. Unlimited mileage.
Rake (fork angle)32.0°
Motorcycle nameHonda Fury

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 678mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2025 Honda Fury, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.