What category is the 2021 Bintelli Beast 49?

General information
Year	2021

Engine and Transmission Specifications
Driveline	CVT
Transmission type	Belt (final drive)
Gearbox	Automatic
Cooling system	Air
Ignition	CDIÂ
Fuel system	Carburettor
Compression	10.4:1
Torque	8.9 Nm (0.9 kgf-m or 6.6 ft.lbs) @ 6500 RPM
Power	9.0 HP (6.6 kW) @ 8000 RPM
Engine type	Single cylinder, four-stroke
Capacity:	49.0 ccm (2.99 cubic inches)

Category	Allround
Model	Bintelli Beast 49
Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Single disc
Rear tire	120/70-12
Front tire	120/70-12
Rear Suspension	SingleÂ shock
Front Suspension	StraightÂ fork
Frame type	SteelÂ
Physical measures and capacities
Fuel capacity	5.49 litres (1.45 US gallons)
Overall width	749 mm (29.5 inches)
Overall length	1786 mm (70.3 inches)
Overall height	1499 mm (59.0 inches)
Seat height	787 mm (31.0 inches) If adjustable, lowest setting.
Power/weight ratio	0.0850 HP/kg
Dry weight	105.7 kg (233.0 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Sold in the US.
Factory warranty	2 year limited warranty
Light	Halogen
Instruments	Analogue
Starter	Electric & kick
Color options	Black, Green, Red

Performance Profile & Rider Fit

3.2 hp

Peak Power

Best For

Track5%

City80%

Cornering25%

Daily Riding60%

Touring10%

Passenger15%

Rider Profile

Best For	This scooter is best suited to brand-new riders or those wanting a low-stakes, low-speed introduction to two wheels.
Purpose	It's built for short, slow urban and neighborhood errands rather than any kind of performance or long-distance riding.
Rider Fit	Its low seat height and light weight make it very accessible to smaller or less physically strong riders.
Character	It's a friendly, unintimidating little runabout that prioritizes simplicity and easy handling over speed or excitement.
Not Ideal For	It's not for anyone wanting highway speeds, long trips, a passenger, or any kind of off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 787mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2021 Bintelli Beast 49, with a relaxed knee angle of around 120 degrees and a forward-leaning riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →