What category is the 2012 Derbi Senda DRD 125 SM?

General information
Category	Super motard
Model	Derbi Senda DRD 125 SM
Year	2012
Engine and Transmission Specifications
Emission details	Euro 3
Clutch	Multi-plate
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Dry sump
Ignition	CDI
Fuel system	Carburettor. 30 mm
Valves per cylinder	4
Bore x stroke	58.0 x 47.0 mm (2.3 x 1.9 inches)
Compression	12.0:1
Power	15.00
Engine type	Single cylinder, four-stroke
Capacity:	124.20 ccm (7.58 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc. Wave
Front brakes diameter	260 mm (10.2 inches)
Front brakes	Single disc. Wave
Rear tyre dimensions	130/70-17
Front tyre dimensions	100/90-17
Rear suspension travel	230 mm (9.1 inches)
Rear suspension	Progressive linkage monoshock with separate gas tank.
Front suspension travel	245 mm (9.6 inches)
Front suspension	Upside down fork
Frame type	Double steel beam
Physical measures and capacities
Fuel capacity	8.00 litres (2.11 gallons)
Wheelbase	1,443 mm (56.8 inches)
Overall width	808 mm (31.8 inches)
Overall length	2,129 mm (83.8 inches)
Seat height	880 mm (34.6 inches) If adjustable, lowest setting.
Power/weight ratio	0.1250 HP/kg
Dry weight	120.0 kg (264.6 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Black/white/red
Starter	Electric

Performance Profile & Rider Fit

15 hp

Peak Power

Best For

Track55%

City70%

Cornering85%

Daily Riding45%

Touring15%

Passenger20%

Rider Profile

Best For	Best suited to riders with at least some experience on light, quick-steering bikes, since the tall seat and supermoto ergonomics reward confidence over outright skill.
Purpose	Built for playful, aggressive around-town riding and tight technical roads rather than covering long distances or hauling gear.
Rider Fit	Its low dry weight and narrow, tall stance make it easy to flick around but the 910mm seat height demands decent inseam length or tiptoe confidence for shorter riders.
Character	A cheeky, flickable little supermoto that loves being thrashed through corners and city traffic with a peppy single-cylinder buzz.
Not Ideal For	Not a good choice for anyone wanting sustained highway speeds, long-distance touring comfort, or carrying a passenger any real distance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 880mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2012 Derbi Senda DRD 125 SM, with a relaxed knee angle of around 140 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →