What category is the 2013 Derbi Senda DRD Racing 50 SM?

General information
Year	2013

Engine and Transmission Specifications
Driveline	Primary transmission: Gear assembly
Clutch	Multi-plate
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Oil pump
Ignition	Electronic CDI
Fuel control	SOHC
Fuel system	Carburettor. 17.5 mm
Bore x stroke	39.9 x 40.0 mm (1.6 x 1.6 inches)
Compression	11.0:1
Engine type	Single cylinder, two-stroke
Capacity:	49.90 ccm (3.04 cubic inches)

Category	Super motard
Model	Derbi Senda DRD Racing 50 SM
Brakes, suspension, Frame and wheels
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc
Front brakes diameter	300 mm (11.8 inches)
Front brakes	Single disc
Rear tyre dimensions	130/70-17
Front tyre dimensions	100/80-17
Rear suspension travel	182 mm (7.2 inches)
Rear suspension	Monoshock with progressive link system.
Front suspension travel	195 mm (7.7 inches)
Front suspension	40 mms. hydraulic fork

Physical measures and capacities
Oil capacity	1.00 litres (0.07 quarts)
Reserve fuel capacity	1.30 litres (0.34 gallons)
Fuel capacity	7.00 litres (1.85 gallons)
Wheelbase	1,400 mm (55.1 inches)
Overall width	805 mm (31.7 inches)
Overall length	2,050 mm (80.7 inches)
Overall height	1,165 mm (45.9 inches)
Seat height	875 mm (34.4 inches) If adjustable, lowest setting.
Dry weight	96.0 kg (211.6 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Blue/white, red/white
Electrical	Battery 12V 4Ah
Starter	Kick

Performance Profile & Rider Fit

Best For

Track60%

City75%

Cornering85%

Daily Riding40%

Touring15%

Passenger15%

Rider Profile

Best For	Best suited to riders with some two-stroke and small-bike experience who enjoy a high-revving, peaky powerband rather than outright speed.
Purpose	Built for playful supermoto antics, tight urban shortcuts, and flicking through corners rather than covering long distances.
Rider Fit	Its featherweight 96 kg dry weight and low 865 mm seat height make it extremely manageable for smaller or lighter riders.
Character	A sharp, buzzy little two-stroke supermoto that rewards revving hard and throwing it into corners with abandon.
Not Ideal For	Not suitable for riders wanting sustained highway speeds, long-distance comfort, or carrying a passenger in any real comfort.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 875mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with tip-toe one foot on the 2013 Derbi Senda DRD Racing 50 SM, with a relaxed knee angle of around 135 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →