What category is the 2014 Honda Benly?

General information
Year	2014
Engine and Transmission Specifications
Greenhouse gases	35.3 CO
Fuel consumption	1.52 litres/100 km (65.8 km/l or 154.75 mpg)
Clutch	Dry multi-plate
Transmission type,final drive	Belt
Gearbox	Automatic
Cooling system	Air
Ignition	Full-transistor battery ignition
Fuel control	OHC
Bore x stroke	33.8 x 44.0 mm (1.3 x 1.7 inches)
Compression	10.1:1
Torque	3.50 Nm (0.4 kgf-m or 2.6 ft.lbs) @ 6000
Power	3.75
Engine type	Single cylinder, four-stroke
Capacity:	49.00 ccm (2.99 cubic inches)

Category	Scooter
Model	Honda Benly

Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Expanding brake (drum brake)
Rear tyre dimensions	110/80-10
Front tyre dimensions	90/90-12
Rear suspension	Unit swing
Front suspension	Telescopic fork
Frame type	Underbone
Physical measures and capacities
Fuel capacity	10.00 litres (2.64 gallons)
Wheelbase	1,280 mm (50.4 inches)
Ground clearance	115 mm (4.5 inches)
Overall length	1,805 mm (71.1 inches)
Seat height	710 mm (28.0 inches) If adjustable, lowest setting.
Power/weight ratio	0.0357 HP/kg
Dry weight	105.0 kg (231.5 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Sold in some Asian countries.
Color options	White/gray, black
Starter	Electric & kick

Performance Profile & Rider Fit

7.8 hp

Peak Power

Best For

Track2%

City90%

Cornering30%

Daily Riding85%

Touring12%

Passenger15%

Rider Profile

Best For	Ideal for absolute beginners or anyone who simply wants stress-free, automatic transportation without worrying about gears or clutch control.
Purpose	Built as a practical delivery and errand-running workhorse, prioritizing low running costs and carrying capacity over performance.
Rider Fit	Very light and low-slung, making it easy to handle for riders of nearly any height or strength, including smaller or less experienced riders.
Character	A humble, utilitarian commuter scooter that values reliability, fuel efficiency, and load-carrying over excitement or speed.
Not Ideal For	Not for anyone seeking highway performance, long-distance touring comfort, or a thrilling, sporty ride.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 710mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2014 Honda Benly, with a moderate knee angle of around 90 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →