Husqvarna WRE 125 - 2003 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelHusqvarna WRE 125
Year2003

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox6-speed
Cooling systemLiquid
StarterKick
Fuel systemCarburettor
Bore x stroke54.0 x 54.5 mm (2.1 x 2.1 inches)
Stroke2
Engine typeSingle cylinder
Capacity:124.80 ccm (7.62 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,500 mm (59.1 inches)
Ground clearance325 mm (12.8 inches)
Seat height880 mm (34.6 inches) If adjustable, lowest setting.
Dry weight108.0 kg (238.1 pounds)
 
 

Husqvarna WRE 125 dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear tyre dimensions120/90-18
Front tyre dimensions90/90-21

Speed and acceleration

Fuel capacity11.20 litres (2.96 gallons)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track20%
City25%
Cornering55%
Daily Riding20%
Touring15%
Passenger5%

Rider Profile

Best ForBest suited to riders with prior off-road or trail experience, as the light chassis and punchy two-stroke power delivery reward active riding over outright forgiveness.
PurposeBuilt purely for enduro and technical off-road use, with long-travel suspension and a two-stroke engine designed for tight trails rather than road commuting.
Rider FitIts lightweight, slim enduro build with a kick starter and tall suspension travel favors physically fit riders comfortable standing on pegs and manhandling the bike over obstacles.
CharacterA raw, high-strung two-stroke trail weapon that thrives on aggressive throttle input and rewards skillful, engaged riding through rough terrain.
Not Ideal ForNot a good fit for riders wanting a comfortable, high-speed road bike or a low-maintenance daily commuter.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 880mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with cannot reach comfortably on the 2003 Husqvarna WRE 125, with a cramped knee angle of around 75 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.