What category is the 2009 Precision Cycle Works Nightmare?

The 2009 Precision Cycle Works Nightmare has a Category of Custom / cruiser.

What is the engine size of the 2009 Precision Cycle Works Nightmare?

The 2009 Precision Cycle Works Nightmare has a Capacity: of 1573.25 ccm (96.00 cubic inches).

What type of engine does the 2009 Precision Cycle Works Nightmare have?

The 2009 Precision Cycle Works Nightmare has a Engine type of V2.

Is the 2009 Precision Cycle Works Nightmare air cooled or liquid cooled?

The 2009 Precision Cycle Works Nightmare has a Cooling system of Air.

How many gears does the 2009 Precision Cycle Works Nightmare have?

The 2009 Precision Cycle Works Nightmare has a Gearbox of 6-speed.

What is the seat height of the 2009 Precision Cycle Works Nightmare?

The 2009 Precision Cycle Works Nightmare has a Seat height of 457 mm (18.0 inches) If adjustable, lowest setting..

Precision Cycle Works Nightmare - 2009 Specifications and Reviews

Name: 2009 Precision Cycle Works Nightmare
Brand: Precision Cycle Works

The 2009 Precision Cycle Works Nightmare is a custom cruiser built for riders seeking distinctive styling and low-slung comfort. Powered by a 1573cc air-cooled V-twin engine, it delivers classic cruiser character with an extended wheelbase and aggressive 40-degree rake. Best known for its unique design aesthetic and premium custom craftsmanship.

⇄ Compare 📅 All Years

2009

❮❯

Precision Cycle Works Nightmare 2009 11842 Thumb

Add/Upload pictures for this motorcycle

General information
Category	Custom / cruiser
Year	2009
Model	Precision Cycle Works Nightmare
Engine and Transmission Specifications
Gearbox	6-speed
Cooling system	Air
Stroke	4
Engine type	V2
Capacity:	1573.25 ccm (96.00 cubic inches)
Physical measures and capacities
Overall length	2,616 mm (103.0 inches)
Seat height	457 mm (18.0 inches) If adjustable, lowest setting.

Precision Cycle Works Nightmare dimensions and frame
Exhaust system	PRC Custom
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	250-18
Front tyre dimensions	90/90-21
Rake (fork angle)	40.0°
Speed and acceleration
Color options	Custom paint.

Rider Fit Visualizer

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 457mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with both feet flat on the 2009 Precision Cycle Works Nightmare, with a cramped knee angle of around 50 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →