Serpento Viper 250 - 2021 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelSerpento Viper 250
Year2021
 
 

Engine and Transmission Specifications

Transmission typeChain   (final drive)
Gearbox5-speed
Cooling systemAir
Engine typeSingle cylinder, four-stroke
Capacity:249.0 ccm (15.19 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear tire4.60-17
Front tire110/90-19
Rear SuspensionMonoshock
Front SuspensionTelescopic fork
 
 

Physical measures and capacities

Fuel capacity15.00 litres (3.96 US gallons)
Wheelbase2080 mm (81.9 inches)
Seat height860 mm (33.9 inches) If adjustable, lowest setting.
Dry weight130.0 kg (286.6 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
CommentsSold in South-America. Produced in China.
Electrical12V / 7A battery
StarterElectric & kick
Color optionsBlack/red

Performance Profile & Rider Fit

16.7 hp
Peak Power

Best For

Track15%
City45%
Cornering55%
Daily Riding45%
Touring25%
Passenger25%

Rider Profile

Best ForSuits newer or budget-conscious riders looking for a light, forgiving offroad-styled bike rather than seasoned high-performance enthusiasts.
PurposeBuilt primarily for light trail riding, commuting on rough roads, and general low-speed utility rather than speed or long-distance comfort.
Rider FitThe low dry weight and moderate seat height make it manageable for smaller or less experienced riders, though the tall-ish enduro stance may still challenge very short riders.
CharacterA simple, low-powered air-cooled single that favors mechanical simplicity, easy maintenance, and off-road capability over refinement or outright performance.
Not Ideal ForNot suitable for riders wanting highway touring speeds, sustained high-speed stability, or a plush, long-distance comfort experience.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 68.9" with a 31" (estimated) inseam will reach the ground with tip-toe one foot on the 2021 Serpento Viper 250, with a cramped knee angle of around 75 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.